Synergy Tech Support

Synergy Nitro Helicopters => Synergy N7 => Topic started by: CZS550 on May 14, 2017, 03:02:24 PM

Title: Auto hub sleeve
Post by: CZS550 on May 14, 2017, 03:02:24 PM
Hey,

I took my N7 apart to service the engine. When reassembling I noticed I have some space between the top of the auto hub sleeve and the auto hub assembly. The delrin shim is installed. A second delrin shim is too much as I cant get the bolt in. Is it possible I need a new sleeve. Should I try to shim it out or just let it be. When completely assembled I can move the main gear up and down.

Thanks.
Title: Re: Auto hub sleeve
Post by: Ross Lawton on May 14, 2017, 04:40:25 PM
Hi CZS550,

A small amount of float is normal and this allows the auto hub to freewheel smoothly.

Hope this helps,
Ross
Title: Re: Auto hub sleeve
Post by: CZS550 on May 14, 2017, 05:08:34 PM
ok thank you
Title: Re: Auto hub sleeve
Post by: Ben Kerr on May 30, 2017, 04:35:06 PM
This really comes down to personal choice. I choose to shim it out. Either way the heli will not have an issue.