Synergy Tech Support

Synergy Electric Helicopters => Synergy 766 => Topic started by: Dalton38 on September 02, 2017, 09:56:28 PM

Title: 4525 and hw 130a for low head speed
Post by: Dalton38 on September 02, 2017, 09:56:28 PM

i'm currently running a 12s G700 with 695mm blades, 4525 motor and hw 130a esc at 1750 rpm.  i fly big air, no hard 3d.

can i run the same motor and 130a esc  on a 766 with a 1600'ish head speed, or would that be pushing it?

Title: Re: 4525 and hw 130a for low head speed
Post by: Chris Sexton on September 03, 2017, 08:43:07 AM

At 1660 on my 12s 766 I have seen spikes of amps around 140 and sustained 75-90 for long periods. Technically your 130 should work but I personally would prefer a 160.


Sent from my iPhone using Tapatalk

Title: Re: 4525 and hw 130a for low head speed
Post by: cml001 on September 04, 2017, 12:04:00 AM

Hummmm... I'd say get a 160 ESC... the 766 is an animal.. at any headspeed.