Synergy Tech Support

Synergy Electric Helicopters => Synergy 516 => Topic started by: turner2 on December 11, 2017, 08:46:23 AM

Title: Talon 90
Post by: turner2 on December 11, 2017, 08:46:23 AM
Anyone experienced BEC failures on the Talon 90 sending full voltage to the electronics and burning them up? I have only read about this.
Title: Re: Talon 90
Post by: Chris Sexton on December 11, 2017, 08:53:11 AM
I have ran the Talon series on numerous helis, never had an issue.  It's a proven product when used in the correct application.
Title: Re: Talon 90
Post by: Rob Cherry on December 11, 2017, 11:03:11 AM
None that I know of.
Title: Re: Talon 90
Post by: dhoskins26 on December 11, 2017, 08:01:41 PM
Hey, I talked to Laura, and she told me that in the repair department they rarely see the talons come back. They are a good and sturdy unit, so that may have just been a faulty one. She said that she rarely hears anyone call in with issues with them as well. There is one airplane motor that the talon 90 does not like to work with and it is an extreme flight motor, but couldn't remember which one. It is hard to say without seeing the unit what exactly happened.
Title: Re: Talon 90
Post by: TheBum on December 11, 2017, 11:13:07 PM
CC had the same issue with their BEC Pro at one time, but it was usually when running from a 12S input. I hope that issue isn’t coming back.
Title: Re: Talon 90
Post by: Rodney Kirstine on December 16, 2017, 05:06:27 PM
I run the Talon 90 in my 516 and the Talon 120HV in my E5ss with no issues on either one.  I've had the 120HV in my super stretch for a couple of years now, on 12S, without a hiccup.
Title: Re: Talon 90
Post by: Cliff Chmiel on December 19, 2017, 10:10:30 AM
Mine craped out on the 3rd flight, I need  to send it back in, had another one, been flying great, about 40 flights
Title: Re: Talon 90
Post by: Cliff Chmiel on March 02, 2018, 03:06:09 PM
I just had another one crap out on my outlaw.
Title: Re: Talon 90
Post by: Rodney Kirstine on March 04, 2018, 08:25:39 PM
Damn, not good luck at all!  :o
Title: Re: Talon 90
Post by: cml001 on March 14, 2018, 07:10:47 AM
What’s ur set up?... that’s very odd!
Title: Re: Talon 90
Post by: Cliff Chmiel on March 15, 2018, 12:47:58 PM
The one my 516 is holding up, first stopped after 3rd flight, this one now has about 100 flights. My one in the EF outlaw craped out after 50 flights, I know I'm pushing it very hard, outlaw speed is everything, so far 156mph , have speed tube on it tell the speed just like a real plank.
Title: Re: Talon 90
Post by: Cliff Chmiel on March 15, 2018, 12:49:17 PM
Sent them off to castle, have not hear back yet.