March 28, 2024, 05:52:50 AM

Author Topic: 130x rail blades  (Read 10406 times)

Offline Greg Jackson

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 1493
    • inner3.com
130x rail blades
« on: January 06, 2013, 08:19:17 PM »
When will these be available?
Synergy & Rail Field Representative
Team Scorpion||Team BK Servos||Team Pulse|

www.inner3.com

Offline Darren Lee

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 620
Re: 130x rail blades
« Reply #1 on: January 07, 2013, 07:01:05 AM »
I helped Matt do some testing a couple weeks ago and he decided to make some changes to maximize performance.  These are a work in progress so there is no set release date at this time.  Rest assured, they will not disappoint!
Team Synergy / Rail Blades / Morgan Fuel

Offline Brandon Bartolomucci

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 1007
130x rail blades
« Reply #2 on: January 07, 2013, 07:33:47 AM »
My card is already on file and ready to be charged. Can't wait for these things!


Regards,
Brandon Bartolomucci
Sent from my iPhone
Regards,
Brandon Bartolomucci
Team Synergy; Scorpion; & Bavarian Demon

Offline steffgiguere

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 1373
Re: 130x rail blades
« Reply #3 on: January 07, 2013, 09:29:08 AM »
I've already pre-ordered, but if it's too long I will have to cancel. You see I bought a 130 only for indoor flight. Still until end of March, then it will be for sell.

Thanks for the info.
Team Synergy, Canada

Offline BrianE

  • Field Representative
  • Full Member
  • ****
  • Posts: 191
Re: 130x rail blades
« Reply #4 on: January 07, 2013, 11:23:41 AM »
I fly my 130X more than anything else - I'll be ordering a pile of these when the become available. 8)
E7SE, Sliverline VBar, Edge 160HVf, Scorpion HKIII 4530, Futaba BLS, OptiGuard and BEC Guards

E5-626, Vbar NEO, Edge 120HV, Scorpion HKIII 4035, MKS 950/980 OptiGuard and BEC Guards

Offline Greg Jackson

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 1493
    • inner3.com
Re: 130x rail blades
« Reply #5 on: January 07, 2013, 09:12:42 PM »
Where can you pre-order?
Synergy & Rail Field Representative
Team Scorpion||Team BK Servos||Team Pulse|

www.inner3.com

Offline Jabird

  • Newbie
  • *
  • Posts: 21
  • Started flying a GMP Cricket in 1984. Still Going!
Re: 130x rail blades
« Reply #6 on: January 14, 2013, 02:47:36 PM »
Not meaning to hijack your thread, But just putting this  out there. I have a 130x for sale on RCG. Price is negotiable. Wanna fund my e5.
http://www.rcgroups.com/forums/showthread.php?t=1808709
Synergy N556, pbiii, 55hzr, xpert, ikon
In the past,
Synergy N5c, CGY750, Futaba 12z, 55hz
Blade 130x ,Cricket, Concept30 dx, SRX, Ergo, Raptor30, 50, and 60, Xcell pro II, Xcell CT, Xcell SE 99,XL Fury pro, XL fury extreme, Robbe milli, Trex 250, 450, 500, Trex 600, shogun, helimax 40

Offline Rodney Kirstine

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 2112
Re: 130x rail blades
« Reply #7 on: January 14, 2013, 07:05:13 PM »
So tempting.  I have such a love/hate relationship with my 130X, though, that I'd hate myself if I bought another one.
Rodney

Team Synergy

Offline Greg Jackson

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 1493
    • inner3.com
Re: 130x rail blades
« Reply #8 on: January 18, 2013, 05:54:25 PM »
I almost sold mine. But will keep it and use it when it actually works.
Synergy & Rail Field Representative
Team Scorpion||Team BK Servos||Team Pulse|

www.inner3.com

Offline jeftre

  • Newbie
  • *
  • Posts: 16
Re: 130x rail blades
« Reply #9 on: January 19, 2013, 06:01:54 AM »
How do you guys like the 130x??I flew and crashed my bl mcpx to the point of no return and it needs to be replaced.Like everyone I got a huge love/hate relation with this little one,I have yet to decide which way to go. Wait for the new bl mcpx v2 or get 130x..I see that the 130x seem to need a few upgrade to be on the ball and is not as crash resistant than the mcpx. Is it that bad??

I finally got all flight orientation and now mixing them up together in flight...steep curve again :o I get disoriented easily while switching ,would like a micro that can help me getting those switch natural...Is the 130x up to the task??My mcpx was really unforgiving...

thanks

Jeff

flyalan

  • Guest
130x rail blades
« Reply #10 on: January 19, 2013, 06:18:00 AM »
I love the 130x. It has been my inverted trainer for a while now. The metal tail pitch slider is the a have to upgrade. IMHO. The tail had too much slop for my liking stock. That may have gotten better. I have one of the first ones out if factory. Other upgrades are bling for me. But I do have them:-) oh, the metal "a" gear upgrade is a must also.

I found it easier to flip than the MCPX and it is more stable inverted. The only thing I have to replace regularly when I crash is "c" tail gear. It is the weak link. I guess it's good to have one weak link instead of breaking something more expensive. The "c" gears are cheap but a bit of a pain to replace.

Alan


Sent from my iPhone using Tapatalk
« Last Edit: January 19, 2013, 06:19:31 AM by flyalan »

Offline Greg Jackson

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 1493
    • inner3.com
Re: 130x rail blades
« Reply #11 on: January 20, 2013, 11:56:02 PM »
I actually found the 130x easier to flip.  The mcpx would bog easily.  I enjoy the 130x when it works, but a lot of times it isn't reliable.  But very nice when it works.
Synergy & Rail Field Representative
Team Scorpion||Team BK Servos||Team Pulse|

www.inner3.com

Offline jeftre

  • Newbie
  • *
  • Posts: 16
Re: 130x rail blades
« Reply #12 on: January 21, 2013, 05:52:53 AM »
Alright guys,thanks for the feedback.

I am looking at something a bit more stable than the mcpx and It looks like the 130x is the way to go.The mcpx is so fast that it makes it less forgiving when practicing new orientation.

I just hope not to buy a new love/hate machine...I wish synergy would makes a quality micro!Throwing money into upgrade is killing me

Jeff

Offline Greg Jackson

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 1493
    • inner3.com
Re: 130x rail blades
« Reply #13 on: January 21, 2013, 10:38:42 PM »
Again remember, I feel like my 130x is waiting for repairs more than any other helicopter.  Check out the nano and the 300x.  If Synergy had a micro/mini, I wouldn't have to ever buy another one of these types of helis.  Will it happen...probably not.  Do we all wish it would happen....hellyeah
Synergy & Rail Field Representative
Team Scorpion||Team BK Servos||Team Pulse|

www.inner3.com

Offline NKY Heli Guy

  • Full Member
  • ***
  • Posts: 164
130x rail blades
« Reply #14 on: January 21, 2013, 11:42:52 PM »
Again remember, I feel like my 130x is waiting for repairs more than any other helicopter.  Check out the nano and the 300x.  If Synergy had a micro/mini, I wouldn't have to ever buy another one of these types of helis.  Will it happen...probably not.  Do we all wish it would happen....hellyeah
Yeah the servos are absolutely horrible... sometimes you get 100 flights sometimes 6. Synergy could rule the Heli world if they could create the high level of quality in the smaller birds. Problem would be who creates he servos and flybarless controllers Futaba... Nope... Spectrum we already know how that goes :)