April 20, 2024, 02:59:40 AM
« previous next »
Pages: [1]

Author Topic: Electronics Placement  (Read 1565 times)

Offline Chris McClard

  • Newbie
  • *
  • Posts: 27
Electronics Placement
« on: January 11, 2013, 12:10:58 PM »
Looking for ideas of were to put all the electronics. If you could post up some pics that would be even better. I like everything super clean, the doctor say I have OCD but I told em they was wrong... Its called CDO (cause its in order) ;).
I'm planning on running a 9650 for the throttle. I would realy like to find a HV throttle servo so I can eleminate the need for a regulator, any ideas and also need ideas for a lipo pack? Can I plug a 2 cell lipo into the Vbar and use it as my RX with the use of satilites?
Thanks
Chris   
Logged
Chris McClard
Fly It Like You Hate It!!!
Synergy N9, Synergy N5c, Synergy 516, Goblin 700, Trex 600E Trex 500 Pro, Trex 250 Pro, Raptor 50, MD 500E with Trex 500 guts, Beam E4.

Offline Chris Sexton

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2729
  • Admiral, There be whales here!
Re: Electronics Placement
« Reply #1 on: January 11, 2013, 01:20:45 PM »
Here is a link to my build thread, lots of pictures on this link and information about my setup in other posts.

http://synergyrchelicopters.com/forum/index.php?topic=1041.msg8756#msg8756
Logged
Chris Sexton
Synergy Factory Specialist / Rail Blades / Team Scorpion

Offline Kevin Feil

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2100
Re: Electronics Placement
« Reply #2 on: January 11, 2013, 09:29:56 PM »
chris,

 The Lipo pack that I run, Matt runs and several other Guys run is the  Thunder Power  7.4 vdc 1900 mah 2 cell pack. Matt being Super Obsessed with Shedding weight uses these packs. Depending on the servo's and FBL unit will determine how many flights you get in between charges. If Memory serves me correct, Matt flies his twice with the set up he has.. I run V-bar on mine with JR8917 hv servos and have gotten away with 4 flights, Depending on the CGY750 settings I would charge mine every other flight. Hope this helps.. Also if you contact Ralph at FBL ROTORS UNLIMITED he has a ton of these Batteries that he is itchin to get rid of, Tell him Kevin sent you and he will take care of you.... by the way he is in Salt Lake City right now so don't freak if he doesn't call you back right away..

Best,

Kevin
Logged
Team Synergy
Team Futaba
Team Scorpion
Team Morgan Fuels

flyalan

  • Guest
Electronics Placement
« Reply #3 on: January 11, 2013, 09:33:13 PM »
That's good to know Kevin.  I am in need of some packs. Never really thought of Ralph on those.
Can I mention your name also :-)

Alan


Alan Butler
Team Synergy
Logged

Offline nick.m

  • Member
  • **
  • Posts: 79
Re: Electronics Placement
« Reply #4 on: January 12, 2013, 04:19:24 PM »
you could allways tuck a regulator on the inside of the frame
Logged

Offline Kevin Dalrymple

  • Field Representative
  • Sr. Member
  • ****
  • Posts: 397
Electronics Placement
« Reply #5 on: January 13, 2013, 12:55:10 PM »
I run my fail safe switch and futaba receiver on the bottom side of the radio tray plate.
Logged
Synergy Field Rep
Rail Blades Field Rep
Pages: [1]
« previous next »