March 29, 2024, 09:59:35 AM

Author Topic: N5c Belt Driven Static  (Read 2516 times)

Offline 88sooner

  • Newbie
  • *
  • Posts: 3
N5c Belt Driven Static
« on: December 05, 2011, 01:59:08 AM »
Matt-
Plan to start building my N5c in a couple of weeks or so.  Should I be concerned about static build-up in the tail caused by the belt drive system?  If so, should I use some sort of anti-static spray or ground the tail?  Will a silicon spray applied to the belt provide some protection from static build-up?

Thanks
88sooner

Offline Brandon Bartolomucci

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 1007
N5c Belt Driven Static
« Reply #1 on: December 05, 2011, 05:47:51 AM »
To help the belt be as smooth as possible a good shot of silicone spray coating to the whole thing a couple times a season will help it and help minimize static. Kevin Feil suggested this to me and I've been doing it ever since. Spray the belt that is exposed at the rear of the boom and turn the main rotor by hand to cover it all and make sure you get the teeth and the back side of the belt. Soak up the excess with a rag and then hang the heli upright to let any more excess drip down.

Also, Matt has noted before that the heli is actually already grounded due to the metal belt pulleys which then to touch the carbon frame. Plus the metal pulleys will help eliminate static since plastic ones rubbing the belt tend to build up more static in the first place.


Regards,
Brandon Bartolomucci
Sent from my iPhone
Regards,
Brandon Bartolomucci
Team Synergy; Scorpion; & Bavarian Demon

Offline Kevin Feil

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2100
Re: N5c Belt Driven Static
« Reply #2 on: December 05, 2011, 06:57:11 AM »
+1 for Brandon ;)

Kevin
Team Synergy
Team Futaba
Team Scorpion
Team Morgan Fuels

Offline 88sooner

  • Newbie
  • *
  • Posts: 3
Re: N5c Belt Driven Static
« Reply #3 on: December 05, 2011, 06:54:05 PM »
Thanks Brandon, I'll take your advice.

Best Regards,
88sooner

Offline Matt Botos

  • Synergy Hero
  • **
  • Posts: 1573
    • Matt Botos
Re: N5c Belt Driven Static
« Reply #4 on: December 13, 2011, 01:07:27 PM »
No worries about static, especially with a nitro helicopter.

++ 1 for silicone spray on the belt.

Matt