March 28, 2024, 09:35:32 PM

Author Topic: cgy 750 tail tuning help  (Read 4377 times)

Offline Chris Sexton

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2729
  • Admiral, There be whales here!
cgy 750 tail tuning help
« Reply #15 on: June 06, 2017, 09:11:18 PM »
I have been accused of being a servo Nazi, but I'm going to tell you the aligne DS 650 does not play well with the CGY. The cgy needs a good quality narrow center pulse servo.

The 650 works on a lot of FBL a systems, but I wouldn't run anything but A 760 center pulse with the CGY


Sent from my iPhone using Tapatalk
Chris Sexton
Synergy Factory Specialist / Rail Blades / Team Scorpion

Offline anthony

  • Full Member
  • ***
  • Posts: 124
Re: cgy 750 tail tuning help
« Reply #16 on: June 06, 2017, 09:37:00 PM »
I don't like align servos but it came with it when I bought it and I haven't had the funds to change it just yet , but be assured it is the first thing on my list to go , what would you recommend for a decent 6v servo?
Anthony
citizen #102

Offline anthony

  • Full Member
  • ***
  • Posts: 124
Re: cgy 750 tail tuning help
« Reply #17 on: June 06, 2017, 09:40:05 PM »
going through my tail mechanics tonight the actual tail is perfect not a hint of any resistance throughout the entire tail motion, I do feel some resistance from the pushrod , I think I will try and find a carbon one I can use to replace the original to free that up some , its not that bad but under flight conditions you just don't know
Anthony
citizen #102

Offline Chris Sexton

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2729
  • Admiral, There be whales here!
Re: cgy 750 tail tuning help
« Reply #18 on: June 06, 2017, 10:02:21 PM »
Futaba BLs251sv is the best 6v tail on the planet of you ask me. But I admit I'm a bit of a servo nazi.

Most of the good HV tails that are 760 center pulse work well on 6v.


Sent from my iPhone using Tapatalk
Chris Sexton
Synergy Factory Specialist / Rail Blades / Team Scorpion

Offline Rodney Kirstine

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 2112
Re: cgy 750 tail tuning help
« Reply #19 on: June 06, 2017, 10:31:31 PM »
I agree with Chris. That servo and the CGY-750 is not​ a good combination.
Rodney

Team Synergy

Offline anthony

  • Full Member
  • ***
  • Posts: 124
Re: cgy 750 tail tuning help
« Reply #20 on: June 07, 2017, 10:40:43 AM »
is that servo discontinued ?
citizen #102

Offline Robert "Full" Montee

  • Full Member
  • ***
  • Posts: 141
    • Facebook
Re: cgy 750 tail tuning help
« Reply #21 on: June 07, 2017, 01:00:39 PM »
What are you powering your servos with and what is the exact voltage?
BLS251SB and BLS276SV are current and available.
Robert "Full" Montee
Team Synergy / Team Futaba
https://robertstechlib.blogspot.com

Offline anthony

  • Full Member
  • ***
  • Posts: 124
Re: cgy 750 tail tuning help
« Reply #22 on: June 07, 2017, 01:42:37 PM »
6.1v hobbywing esc
citizen #102

Offline Robert "Full" Montee

  • Full Member
  • ***
  • Posts: 141
    • Facebook
Re: cgy 750 tail tuning help
« Reply #23 on: June 07, 2017, 11:44:20 PM »
You are running a voltage range that fits the BLS276SV Futaba tail servo.
Robert "Full" Montee
Team Synergy / Team Futaba
https://robertstechlib.blogspot.com

Offline anthony

  • Full Member
  • ***
  • Posts: 124
Re: cgy 750 tail tuning help
« Reply #24 on: June 08, 2017, 05:27:39 AM »
ok thank you , when I can afford it I will give it a try,
citizen #102

Offline anthony

  • Full Member
  • ***
  • Posts: 124
Re: cgy 750 tail tuning help
« Reply #25 on: June 12, 2017, 08:33:54 AM »
I realise that this is the wrong forum for this question so I will keep it short, I changed the pushrod on my x5 to a carbon rod supported in the middle , tail is better but I have to tune out the ccw bounce ( cnt dly out I believe is the parameter) I have been noticing a head shake at low rpm which is getting worse so I think I have to change my dampeners too , this I think will solve my problem , thank you for all of your time , I think that is all , until I get a 516 anyway
Anthony
citizen #102

Offline Robert "Full" Montee

  • Full Member
  • ***
  • Posts: 141
    • Facebook
Re: cgy 750 tail tuning help
« Reply #26 on: June 12, 2017, 02:48:47 PM »
Good to read, enjoy flying!!
Robert "Full" Montee
Team Synergy / Team Futaba
https://robertstechlib.blogspot.com

Offline Cliff Chmiel

  • Synergy Veteran
  • *
  • Posts: 588
  • Cliff
Re: cgy 750 tail tuning help
« Reply #27 on: June 13, 2017, 07:48:34 AM »
I had awesome luck with the bk line, 7001-7005   and the small ones for my little gobins 420 and 380. have the 7001 in my E5s, E7se,and my 766, Have MKS in my scale 800 222
Cliff

Offline Rodney Kirstine

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 2112
Re: cgy 750 tail tuning help
« Reply #28 on: June 13, 2017, 10:52:21 AM »
I currently have BK tail servos in all my models, as well, with great success. 
Rodney

Team Synergy