August 22, 2017, 03:38:20 PM

Author Topic: Configurations  (Read 2600 times)

Offline Chris Sexton

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2645
  • Admiral, There be whales here!
Configurations
« Reply #45 on: June 12, 2017, 04:28:20 PM »
...
« Last Edit: June 12, 2017, 05:34:17 PM by Chris Sexton »
Chris Sexton
Synergy Factory Specialist / Rail Blades / Team Scorpion

Offline Rob Cherry

  • Factory Pilot
  • Sr. Member
  • *****
  • Posts: 301
Re: Configurations
« Reply #46 on: June 12, 2017, 04:44:05 PM »
I hope something from the Xpert line fits.

The challenge we're running into is the distance between mounting tabs. I've attached an image showing how the Futaba's fall short by 4mm total... other brands as well. The mount hole spacing should be ~42.5mm. When they fall short it's up to the end user to accommodate and adapt, which is what a lot of guys have done on other helis.

However, Synery can only recommend servos that are a direct fit without requiring custom adapters or large washers. So far the confirmed list is very small: MKS, BK and Savox/Align.
Synergy Factory Pilot

Offline TheBum

  • Newbie
  • *
  • Posts: 7
Re: Configurations
« Reply #47 on: June 12, 2017, 05:52:09 PM »
The Kingmax CLS4411HHV servos that Shannon will be offering in one of his combos should fit pretty well then. The hole spacing on them is 41.96mm.

Offline Rob Cherry

  • Factory Pilot
  • Sr. Member
  • *****
  • Posts: 301
Re: Configurations
« Reply #48 on: June 12, 2017, 07:16:59 PM »
The Kingmax CLS4411HHV servos that Shannon will be offering in one of his combos should fit pretty well then. The hole spacing on them is 41.96mm.
Close enough!

Sent from my XT1254 using Tapatalk

Synergy Factory Pilot

Online codepox (Guillaume)

  • Field Representative
  • Newbie
  • ****
  • Posts: 36
Re: Configurations
« Reply #49 on: June 13, 2017, 01:17:54 PM »
Does the cyclic servo horns still have the ball at 20mm from center?

Offline Rob Cherry

  • Factory Pilot
  • Sr. Member
  • *****
  • Posts: 301
Re: Configurations
« Reply #50 on: June 13, 2017, 06:58:48 PM »
That won't be as important as long as they are all the same. Turnbuckles have lots of adjustment for length.

Sent from my XT1254 using Tapatalk

Synergy Factory Pilot

Online codepox (Guillaume)

  • Field Representative
  • Newbie
  • ****
  • Posts: 36
Re: Configurations
« Reply #51 on: June 14, 2017, 11:32:02 AM »
Awesome, thanks.

Offline Greg Jackson

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 1481
    • inner3.com
Re: Configurations
« Reply #52 on: June 18, 2017, 10:30:17 PM »
I've had my electronics sitting for months, can't wait to get them mounted.

Scorpion 4020-1350
BK 5001HV
BK 7006HV
Rail Blades
ESC?????? Still undecided
Pulse 3700, 4100, 4500
Brain2 HD
Doing some testing with the cyclic settings now to make sure the ring does not induce the possibility of boom strikes. On my E7  I lowered the recommended 10 degrees down to around 9, while stillnrunning 13 pitch, and I'm getting 21 to 22 all around like vbar. Still handles everything I can through at it.
Synergy & Rail Field Representative
Team Scorpion|MSH Brain Flight Team|Team BK Servos|Jeti Team Pilot|Team Pulse|

www.inner3.com

Offline Gabriel Sandoval

  • Field Representative
  • Sr. Member
  • ****
  • Posts: 276
  • If your not crashin' your not trying hard enough..
Re: Configurations
« Reply #53 on: June 20, 2017, 10:15:19 AM »
I'm running the recommended setup with exception to the FBL and servos. Servos will be JR ELSO1 QRS and tail ELGO1 QRS which do not fit exactly perfect so out comes the milling machine to save the day with adapter brackets.
Batteries will be ??? I walked from TP so open to options there. Spartan FBL as usual.
Team Synergy
Team Scorpion
Team JR Americas
Looking for a fuel Sponsor

Offline Rob Cherry

  • Factory Pilot
  • Sr. Member
  • *****
  • Posts: 301
Re: Configurations
« Reply #54 on: June 22, 2017, 09:00:18 AM »
I'm running the recommended setup with exception to the FBL and servos. Servos will be JR ELSO1 QRS and tail ELGO1 QRS which do not fit exactly perfect so out comes the milling machine to save the day with adapter brackets.
Batteries will be ??? I walked from TP so open to options there. Spartan FBL as usual.

Yeah, avoid TP like the plague. QC is gone, source cells are junk. I take great care of packs and have never had so many issues in just one year with 7 packs dying...  Loving my Pulse 4500 45c and what remains of some 4-5 year old 4400 35c Gens Ace. :)
Synergy Factory Pilot

Offline cml001

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 587
Re: Configurations
« Reply #55 on: June 22, 2017, 10:42:51 AM »
This year I had my first Pulse go bad... I got over 3yrs out of it!
Clay
I can fly helicopters... Upside down!

Offline Gabriel Sandoval

  • Field Representative
  • Sr. Member
  • ****
  • Posts: 276
  • If your not crashin' your not trying hard enough..
Re: Configurations
« Reply #56 on: June 22, 2017, 11:03:38 AM »
Yep has a brand new 6S pack go bad at IRCHA last year and sent it in for warranty. They created a service ticket then after a week or so it disappeared from my order list so another email sent. Waited 3 weeks for a reply saying no warranty on the pack and no reason for their decision. Besides waiting months for a pack from order to arrival and to have them be bad and poor customer service from your sponsor is no good. Done with them FOREVER and I have used them with great results in the past even though they had the oddball balance lead. I have had Pulse Rx packs go bad but after 2 years of service for $25 you can't go wrong and I can get them from JR Americas at the team price...Best of all is they show up in 3 days if in stock.
Team Synergy
Team Scorpion
Team JR Americas
Looking for a fuel Sponsor

Offline Rodney Kirstine

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 1947
Re: Configurations
« Reply #57 on: June 22, 2017, 06:24:14 PM »
I bought several each of 4400 and 5000 6S packs last year and they are a bitch to keep balanced.  First and last TP packs for me.
Rodney

Team Synergy

Offline Only Fine Helis

  • Newbie
  • *
  • Posts: 7
Re: Configurations
« Reply #58 on: July 02, 2017, 03:41:23 PM »
Hey guys,

Several had asked about the XNova motors earlier.

XNova has agreed to make the 4020-1200 with a 32mm shaft with the flat cut all the way down the shaft.  I have a bunch of them on the way and they will be available soon.

Looking forward to this machine!!!

Offline Jon Yarger

  • Field Representative
  • Member
  • ****
  • Posts: 55
Re: Configurations
« Reply #59 on: July 02, 2017, 08:16:01 PM »
Will you have shafts only for those that already have a motor?