September 22, 2017, 08:17:43 AM

Author Topic: 4525 and hw 130a for low head speed  (Read 92 times)

Offline Dalton38

  • Newbie
  • *
  • Posts: 1
4525 and hw 130a for low head speed
« on: September 02, 2017, 09:56:28 PM »
i'm currently running a 12s G700 with 695mm blades, 4525 motor and hw 130a esc at 1750 rpm.  i fly big air, no hard 3d.

can i run the same motor and 130a esc  on a 766 with a 1600'ish head speed, or would that be pushing it?

Online Chris Sexton

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2654
  • Admiral, There be whales here!
Re: 4525 and hw 130a for low head speed
« Reply #1 on: September 03, 2017, 08:43:07 AM »
At 1660 on my 12s 766 I have seen spikes of amps around 140 and sustained 75-90 for long periods. Technically your 130 should work but I personally would prefer a 160.


Sent from my iPhone using Tapatalk
Chris Sexton
Synergy Factory Specialist / Rail Blades / Team Scorpion

Offline cml001

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 592
Re: 4525 and hw 130a for low head speed
« Reply #2 on: September 04, 2017, 12:04:00 AM »
Hummmm... I'd say get a 160 ESC... the 766 is an animal.. at any headspeed.
Clay
I can fly helicopters... Upside down!