Synergy Electric Helicopters > Synergy 766

xnova 4530 or XTS 4530

(1/1)

exiged:
Im looking to start my 766 build shortly and have been looking at the xnova 4530-500.

Im assuming the XTS 4530-525 would be a little more powerful and power hungry?. Im not looking to go crazy as only running 45-90c packs in 12s config, but still obviously want a capable machine for hard sport/ mild 3d.

160 esc and 766 blades.

Rodney Kirstine:
I run the 4530-500 in mine with a CC 160HV and 766 and it's more than capable for the type of flying you are talking about and with good flight times.

exiged:

--- Quote from: Rodney Kirstine on September 30, 2017, 11:51:08 AM ---I run the 4530-500 in mine with a CC 160HV and 766 and it's more than capable for the type of flying you are talking about and with good flight times.

--- End quote ---

cheers fella

Grimmy:
The XTS will have thicker wire in the windings.  I went that way figuring it would run cooler, and the power is there if I need it.  I'm getting 8 minutes on my 806 with that motor.  This winter it will get telemetry installed on it and I'll be able to fly longer.

Navigation

[0] Message Index