May 05, 2024, 02:35:17 PM
« previous next »
Pages: [1]

Author Topic: plastic ball link with set screw  (Read 687 times)

Offline roofcutter1

  • Newbie
  • *
  • Posts: 1
plastic ball link with set screw
« on: May 26, 2019, 11:47:17 AM »
the ball link with set screw for mixing arms is too big for the steel ball links in the swarth plate. who ever assembles the head needs to take note of this. now I will have to try to mod the right ones, bummer
Logged

Offline alan

  • Sr. Member
  • ****
  • Posts: 275
  • Team Helilids
Re: plastic ball link with set screw
« Reply #1 on: May 26, 2019, 05:02:35 PM »
There are two lengths of the 516 links.
107-099 are the long ones and 107-099A are the short ones for the follower linkages.
Cheers
Alan


Sent from my iPhone using Tapatalk
Logged
Team Helilids RC

Offline alan

  • Sr. Member
  • ****
  • Posts: 275
  • Team Helilids
Re: plastic ball link with set screw
« Reply #2 on: May 28, 2019, 04:18:25 PM »
I realized from your helifreak post you were referring to the links being too large for the balls on the swash.
First question was this a new unopened kit? If that’s the case Again I would contact Matt.

Cheers
Alan


Sent from my iPhone using Tapatalk
Logged
Team Helilids RC
Pages: [1]
« previous next »