Synergy Tech Support

General => Rotor Blades => Topic started by: Cliff Chmiel on February 01, 2016, 03:01:41 PM

Title: symmetrical
Post by: Cliff Chmiel on February 01, 2016, 03:01:41 PM

Are the rail blades full symmetrical like to try a set on my scale 222 800 size but its ccw rotation

Title: Re: symmetrical
Post by: Mike Spano on February 01, 2016, 03:48:56 PM

they are symmetrical, yes. most guys fly semi-symmetrical on scale ships.

Title: Re: symmetrical
Post by: Cliff Chmiel on February 01, 2016, 09:51:43 PM

Mine on my big roban are flat bottom, semi symmetrical are very hard to find in ccw 750mm, some scale guys are flying full symmetrical, with pretty good results.

Title: Re: symmetrical
Post by: Mike Spano on February 02, 2016, 10:23:50 AM

yea, I noticed you said it is ccw after I posted that. yes, the rail blades will fly just fine, even if they are spinning the wrong way!  ;D

Title: Re: symmetrical
Post by: Cliff Chmiel on February 03, 2016, 07:20:19 AM

going to look funny upside down :o

Title: Re: symmetrical
Post by: Mike Spano on February 03, 2016, 08:00:17 AM

hahaha

Title: Re: symmetrical
Post by: Cliff Chmiel on February 10, 2016, 02:32:11 PM

Any one know the root thickness of a 766 blade, is 12mm like the rest of the rails? or 14mm?

Title: Re: symmetrical
Post by: Chris Sexton on February 10, 2016, 02:46:39 PM

Quote from: Cliff Chmiel on February 10, 2016, 02:32:11 PM

Any one know the root thickness of a 766 blade, is 12mm like the rest of the rails? or 14mm?

14 ;) No spacers needed on the 766 with Rail 766 or 806 blades.

Title: Re: symmetrical
Post by: Cliff Chmiel on February 10, 2016, 02:58:19 PM

Thanks Chris, wanted to flip them and put on my scale 222, but I have 12mm grips bummer, just might have to buy a 766 head with 12mm main shaft, then run it ccw.