Synergy Tech Support
Synergy Electric Helicopters => Synergy E5 => Topic started by: Helikid42 on September 25, 2017, 12:15:25 PM
-
Does any one know what 10mm swash leveler is available for this heli? Thank you for any responses!
-
There are several available . I use the Align 10mm leveler!!!
-
I use the Soko Heli Tool.
-
Soko heli tool.
Great for an accurate setup, I've used mine for a 360 through 766.
Sent from my GT-I9507 using Tapatalk
-
I use the 3d printed one from 3dheliupgrades.com
-
If you are looking for ease of use, FBL rotors makes a nice one also. I’ve used several and the SOKO is by far the most advanced.
-
If you are looking for ease of use, FBL rotors makes a nice one also. I’ve used several and the SOKO is by far the most advanced.
The FBL Rotors leveler doesn't work with the new style swash. The feature Ralph put on his leveler to set the old swash follower height hits the inner swash on the new design. It requires a decent amount of modification with a mill or cutting tool.
-
The align works well.. has an insert for multiple shaft diameters. Another good one is “rd lohr’s” from clearly superior. I’ve been using the rd lohr lately because u can keep the head on while u use it.
http://rdlohr.com/ (http://rdlohr.com/)
-
The FBL Rotors leveler doesn't work with the new style swash. The feature Ralph put on his leveler to set the old swash follower height hits the inner swash on the new design. It requires a decent amount of modification with a mill or cutting tool
Thanks Danny, very good point. I didn't even think about the new model swash.
-
Goblin 500 swash leveler also works.
Sent from my iPhone using Tapatalk
-
Look at a Trueblood swash leveler.
http://www.truebloodengineering.com/levelers.html (http://www.truebloodengineering.com/levelers.html)