May 08, 2024, 05:11:12 PM
« previous next »
Pages: [1]

Author Topic: New guy  (Read 2327 times)

Offline Bill Mullin

  • Newbie
  • *
  • Posts: 15
New guy
« on: January 26, 2013, 03:57:41 PM »
Hi folks,
Just picked up a N5c for Christmas and began building. Got a Hyper 55 for it, some
HV MKS servos, haven't yet decided which FBL unit. Gonna have some questions, looking
forward to chatting with ya'.

Bill.
Logged

Offline Chris Sexton

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2729
  • Admiral, There be whales here!
New guy
« Reply #1 on: January 26, 2013, 04:25:10 PM »
Welcome to the synergy family! You will love the N5c. My first nitro and already my favorite to fly!
Logged
Chris Sexton
Synergy Factory Specialist / Rail Blades / Team Scorpion

flyalan

  • Guest
New guy
« Reply #2 on: January 26, 2013, 04:40:29 PM »
Welcome Bill!
That's a great combo.
As far as FBL units I suggest you check with your local flyers if this is your first one. Helps to have experience close at hand. I have flown just about all of the units out there.  No really a bad one in the bunch.  For nitro the CGY750 is awesome. What radio do you have?

Cheers
Alan


Sent from my iPhone using Tapatalk
Logged

Offline Anthony Oxlade

  • Full Member
  • ***
  • Posts: 122
Re: New guy
« Reply #3 on: January 26, 2013, 04:48:26 PM »
Welcome Bill! Hope you enjoy your first Synergy!

Anthony
Logged
Synergy E7 - 4525 Ultimate, 8917HV, HBL980, Vbar Silverline, HW 120HV, Quasar 7075 BEC, Edge 693/115
Synergy E7 - 4525 Ultimate, 8717HV, HBL980, Vbar Silverline, Scorpion 130A, HV2 BEC, Rail 696/116

Offline steffgiguere

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 1373
Re: New guy
« Reply #4 on: January 26, 2013, 06:06:57 PM »
Welcome to the Synergy family Bill, hope you have fun with us here.
Logged
Team Synergy, Canada

Offline Brandon Bartolomucci

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 1007
New guy
« Reply #5 on: January 26, 2013, 06:08:24 PM »
Yes welcome and congrats on your heli! I agree that there's not really a flybarless unit that will serve you wrong. I can advise that I am using the standard BeastX on my N5c and it has performed flawlessly although I am in the minority as most use an alternative system.

We will all be glad to assist where we can so don't hesitate to ask any questions or share your experience!


Regards,
Brandon Bartolomucci
Sent from my iPhone
Logged
Regards,
Brandon Bartolomucci
Team Synergy; Scorpion; & Bavarian Demon

Offline Bill Mullin

  • Newbie
  • *
  • Posts: 15
Re: New guy
« Reply #6 on: January 26, 2013, 08:24:07 PM »
Thanks guys. Really looking forward to this machine. I'm currently flying an Align 600n with
Beastx. I bought a new Ikon for the Synergy, but..., If things work out I may be looking at
a new Futaba 14SG,(flying DX8 now), and if I go Futaba, will probably try the 750. A buddy of mine uses that and really likes it with the newest firmware update. So, not sure right now.

Bill
Logged

flyalan

  • Guest
New guy
« Reply #7 on: January 26, 2013, 08:33:53 PM »
The new CGY750 firmware rocks. If you fly Futaba the CGY750 is definitely the way to go. The governor works well. Changing gains and head speeds is painless right from the radio.

Cheers
Alan


Alan Butler
Team Synergy
Logged

Offline RichL

  • Synergy Veteran
  • *
  • Posts: 802
Re: New guy
« Reply #8 on: January 26, 2013, 10:40:52 PM »
Bill, welcome to the Synergy family.


Rich
Logged
Synergy E5: Scorpion HKIII 4025-1100, CC ICE2 120HV, Rail 556/96, V-Bar Silverline

Synergy E7: Quantum 4530-500, CC ICE2 160HV, Rail 716/116, V-Bar Silverline

Offline Barry Tilson

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 617
  • Perspective Visuals
New guy
« Reply #9 on: January 30, 2013, 05:30:24 PM »
Welcome!


Sent from my iPhone using Tapatalk
Logged
Perspective Visuals

Offline Kevin Feil

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2100
Re: New guy
« Reply #10 on: January 31, 2013, 05:14:35 PM »
Welcom Bill to the Family!

Best Regards,

Kevin
Logged
Team Synergy
Team Futaba
Team Scorpion
Team Morgan Fuels

Offline Bill Mullin

  • Newbie
  • *
  • Posts: 15
Re: New guy
« Reply #11 on: February 14, 2013, 02:39:55 PM »
Hello again and thanks for the nice welcome! This is such a cool place.
Wasn't sure about something, and thought I'd ask here.
Is it okay to ask a question, for example about throttle servos, in someone else's thread about throttle servos, or should I start my own thread to ask? (this is kinda after the fact)

Bill
Logged

Offline Chris Sexton

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2729
  • Admiral, There be whales here!
Re: New guy
« Reply #12 on: February 14, 2013, 02:57:55 PM »
Generally you wouldn't want to take the thread off topic, but if your question is relevant to the original thread's question, post away.  But starting your own thread is always an option!

Off topic posts, or thread jacking, happens everyday, it's part of the forum life :) don't be afraid to post here. We welcome the questions, and would love to help!
Logged
Chris Sexton
Synergy Factory Specialist / Rail Blades / Team Scorpion

Offline Kevin Feil

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2100
Re: New guy
« Reply #13 on: February 14, 2013, 10:46:51 PM »
Welcome to the Family Bill! Great Bird to have! Clearly the best 50/600 class nitro on the Market..

Glad to have you!

best,

Kevin
Logged
Team Synergy
Team Futaba
Team Scorpion
Team Morgan Fuels
Pages: [1]
« previous next »