Synergy Nitro Helicopters > Synergy N5 / N5c

N5c Switch ?

(1/1)

nickwap:
I have a switch mounted in the stock position, where do I get fingers to use it with the canopy on? ???

Or do I need to fit a pin switch.

Don't mind either way, just wondering what everybody else does.

Nick

Kevin Feil:
Nick,

 If you have a Dremel handy just slot a hole on the right side of the heli like the N9 canopies where.  I have done both, I use a Pin switch on one and slotted a hole on the othe.  Take some Blue tape or masking tape in general and try to line it up as best as possible and put the tape on the canopy and draw it out. Make your cut with the Tape still on. this will help minimize paint chips or flaking.  Good Luck! ;D

Kevin

nickwap:
Thanks for that Kevin,
I have a pin switch in 'stock' so I think I'll use that, seems a shame to cut such a nice canopy :)

Kevin Feil:
I know what you mean!!! Good Luck Brother!! ;)

Kevin

Navigation

[0] Message Index