Synergy Tech Support
Electronics Setup Information => Setup Info => Topic started by: peteowlsmith on August 04, 2018, 02:39:42 PM
-
Hi Experts,
I sold one of my two N5c's and kept the one where the Governor never worked. Thus the post.....
I copied the program from the Green one (sold) to the Orange one (current). Screen shots attached from 8FG Super.
When I do the IDLE and HIGH Test, the throttle servo goes from the Low to High position as expected.
Normal is Governor OFF, and IDLE 1 and IDLE 2 to ON. When engage IDLE1 or IDLE2 bench, Throttle goes to High position. At the field it does the same thing.
Sensor is 2% for one magnet and 96% for other one.
Any suggestions from a Nitro Synergy Lover?
tnx, Pete