Synergy Tech Support

General => Rotor Blades => Topic started by: mahbouni on November 14, 2012, 04:03:16 AM

Title: Rail 626
Post by: mahbouni on November 14, 2012, 04:03:16 AM

Are we likely to see these in the future?

Title: Re: Rail 626
Post by: Noah Wiley on November 16, 2012, 06:55:32 PM

I also have the same question. I have no clue but I know I much prefer 620's than 600's and would pre order them...

Title: Re: Rail 626
Post by: Matt Botos on November 24, 2012, 10:34:12 PM

I am assuming most people are running 620 size blades on electric helicopters? I've found that 620 size blades on nitro are a bit too much for a 50-55 size motor to handle.

Matt

Title: Re: Rail 626
Post by: mahbouni on November 25, 2012, 08:07:24 PM

Nitro, meh. You know Rail 626 on electric is going to be awesome!

Title: Re: Rail 626
Post by: Matt Botos on November 26, 2012, 02:28:29 AM

Have to admit! I think they would rock!

Title: Re: Rail 626
Post by: mahbouni on November 26, 2012, 07:46:53 AM

Great! So when can we have them?

Title: Re: Rail 626
Post by: Noah Wiley on November 27, 2012, 04:28:02 PM

I do not think that 620mm blades are to big for nitro. I ran 620mm blades on my old N5 and loved them. Ya you have to use more collective management, but they are popier and smoother than 600mm. The old N5 was heavier than some other 50 size nitros, but they are still my preference. 

Title: Re: Rail 626
Post by: NovaCX12 on January 07, 2013, 10:10:37 PM

I'd like to see this size also, maybe some 526mm and 92' Tails?

Title: Re: Rail 626
Post by: mahbouni on August 05, 2013, 04:36:29 PM

Coming soon...

http://railblades.com/main-blades/ (http://railblades.com/main-blades/)

Title: Rail 626
Post by: flyalan on August 05, 2013, 08:41:50 PM

That will make quite a few folks very happy!

Cheers
Alan

Title: Re: Rail 626
Post by: Zaneman007 on October 30, 2013, 07:24:28 PM

I'm running 625's on a N5c with a YS56. They work for me. But, I just do big sky stuff. No smack down.

I just got another N5c, and a YS60. I'm think 630's.

The 625's auto like, well....... It just makes it easy.

Title: Re: Rail 626
Post by: in2deep on January 13, 2014, 09:30:55 PM

Any updates on these? Sounds like a good fit for the N5c and the new GT15HZ-600.

Title: Re: Rail 626
Post by: Matt Botos on January 22, 2014, 01:29:46 PM

I have prototype samples right now.... just waiting on some decent weather for testing. :)

Matt

Title: Re: Rail 626
Post by: steffgiguere on January 22, 2014, 01:40:34 PM

It would be very hard for me but I'm willing to help test them, you know in our cold weather.

Title: Re: Rail 626
Post by: Darren Lee on January 23, 2014, 11:15:15 AM

You plan on running them on the N5c Matt?  Is there enoungh clearance with the TT version boom?

Title: Re: Rail 626
Post by: BrianE on January 25, 2014, 09:24:45 AM

Oh yeah - 626s for the E5S  8)

Title: Re: Rail 626
Post by: Matt Botos on January 27, 2014, 12:24:09 AM

I plan on testing them both on the N5c and the E5 stretch. I have the check my drawings but I believe I left just enough for the stretch boom to clear with 626. If not there is always the next length boom which was the original E6 and N5c Belt boom. :)

Gotta love options!

Matt

Title: Re: Rail 626
Post by: Steviepoo on January 27, 2014, 06:22:29 AM

Nice!

Title: Re: Rail 626
Post by: Steviepoo on March 24, 2014, 01:37:02 PM

So when might we be able to get some 626s for ourselves?  ;D

Title: Re: Rail 626
Post by: Matt Botos on March 29, 2014, 09:22:15 AM

I should have the first batch, which will be small, by the end of April.

Matt

Title: Re: Rail 626
Post by: steffgiguere on March 29, 2014, 11:46:27 AM

Matt please let me know when I can pre-order, I really want a pair.

Title: Re: Rail 626
Post by: Steviepoo on March 31, 2014, 09:40:17 AM

I'd totally pre-order a set

Title: Re: Rail 626
Post by: pistol974 on April 03, 2014, 05:40:38 PM

Will the first run be to vendors or just on the Synergy store?
Can't wait!!!