Synergy Tech Support
Synergy Nitro Helicopters => Synergy N5 / N5c => Topic started by: wbefield on October 08, 2012, 01:51:21 PM
-
Since my next heli will be a Synergy, I figured I should register for he forums here. For awhile I was set on getting the E5 when it is released, but after attending the GA Heli Swarm I've decided I would rather have a nitro bird. The smoke and noise is awesome!! And I love how big the NC5 looks in the sky compared to my 6HV. BTW. I know absolutely nothing about nitro. Hopefully ya'll won't be annoyed by all the dumb questions I may have. :)
Anyways, Hello All!
-
Ask away, I'm sure you will get lots of great help here.
-
Welcome to the Synergy Support Forums! And Welcome to the Synergy Family :) We really are a big family here. I too am new to Nitro, and I found a WEALTH of information and feed back here.
-
Fantastic Ya'll. Thank you.
Question number one :)
Do I have to have the motor and servos to put the NC5 together? This is gonna be my winter build and since I'm learning nitro, I'd like to take my time and spread out the expense of a new heli build. I would like to put the airframe together and come back as I get my components and install them. BTW. I've said this before, and ended up not being able to wait and got done with the build way earlier than planned.
-
You can put it together or at least the majority of it together without the motor and servos. There are some pieces such as the receiver/battery tray, fan shroud, and motor mounts that you wouldn't want to put on until you have the motor installed and wires from the servos and receiver in place. Other wise build away!
Regards,
Brandon Bartolomucci
Sent from my iPhone
-
@cdsexton
Saw in your signature that you have a MSH Brain on you N5C. How is that going? Are you using the Brain governer?
-
Any benifit of using crankcase pressure like on a YS vs the ones that use pressure from the exhaust?
-
@cdsexton
Saw in your signature that you have a MSH Brain on you N5C. How is that going? Are you using the Brain governer?
Don't know yet :) Still awaiting parts. Got a little carried away and added it to my signature :) Yes I am planning to run the Brain gov with the Futaba sensor.
-
@cdsexton
Saw in your signature that you have a MSH Brain on you N5C. How is that going? Are you using the Brain governer?
Don't know yet :) Still awaiting parts. Got a little carried away and added it to my signature :) Yes I am planning to run the Brain gov with the Futaba sensor.
I've got two so far, one on my 6hv and another on my Protos 500. They fly great. I will def have one on my N5C.
-
Welcome to the family, In regards to the question on the "Brain FBL Unit" Tommy Wagner is the one to speak with, He runs it on his N5c and loves it. Welcome once again to the Synergy Family.
BR,
Kevin
-
My N5c will finally fly this weekend. Thanks Tommy and Kevin for taking the time to help me via email/phone.
Here is my final setup:
OS 55HZ-R & Funtech B320
Brain FBL
Align RPM sensor
MKS HBL 950/980
Futaba S9257
Gryphon GVR-7020
PushGlo
Rail Blades
Booya on back and QuickUK magnetics on front.
OMI Fuel Magnet
[attachment deleted by admin]
-
Good luck man! It's been a while coming. I am sure you will love it!
Sent from my iPhone using Tapatalk
-
Your Very welcome!! I knew Tommy would be the Right Man for that job, He is a Walking FBL Library, He has been bustin on me to try the Brain for a while and I think I'm ready to pull the trigger. You make sure you let us know how the N5c does.. You have a very clean setup Brother, She ought to rock n roll!!
Best Regards,
Kevin