Synergy Tech Support

Electronics Setup Information => Setup Info => Topic started by: Chris Wall on December 02, 2013, 12:15:33 PM

Title: Castle ESC Settings for Scorpion Motors
Post by: Chris Wall on December 02, 2013, 12:15:33 PM

I just purchased a 4525-520 Ultimate and I am using a CC Edge 160HV - this is the first Scorpion motor (used to KDE motors) and I am finding very little information outside of the 8 PWM setting.  I emailed Castle and they said leave everything at default except the PWM.  I am using the vbar governor and I seem to be getting a little "pulsing" sound (RPM change?) out of the motor.  Any recommendations?

Title: Re: Castle ESC Settings for Scorpion Motors
Post by: Chris Sexton on December 02, 2013, 12:59:57 PM

I would turn the VBar gov gain down to like 20 or 25 see if that helps. All my scorpions run stock ESC settings minus the PWN and run great.

Title: Re: Castle ESC Settings for Scorpion Motors
Post by: Chris Wall on December 03, 2013, 07:53:53 AM

Thanks Chris - I'll try that.