Synergy Tech Support

Synergy Electric Helicopters => Synergy 766 => Topic started by: earlybird0513 on February 03, 2019, 11:27:12 AM

Title: Bk servo vertical play?
Post by: earlybird0513 on February 03, 2019, 11:27:12 AM

I got the bk 7002 for the cyclic of my 766. There is a bit of vertical play between the upper and middle bearing blocks. Maybe a 1/16”. Should I just let the screws do the centering ?


Sent from my iPhone using Tapatalk

Title: Re: Bk servo vertical play?
Post by: Greg Jackson on February 09, 2019, 06:27:09 PM

Quote from: earlybird0513 on February 03, 2019, 11:27:12 AM

I got the bk 7002 for the cyclic of my 766. There is a bit of vertical play between the upper and middle bearing blocks. Maybe a 1/16”. Should I just let the screws do the centering ?


Sent from my iPhone using Tapatalk

Sorry you are having some difficulty. Did you go through the entire frame setup again to see if something might be misaligned? I am running those servos in my 766 and there is not any play. Same on my previous 766. Check the frame before anything else.

Title: Re: Bk servo vertical play?
Post by: earlybird0513 on February 09, 2019, 09:05:44 PM

Quote from: Greg Jackson on February 09, 2019, 06:27:09 PM

Quote from: earlybird0513 on February 03, 2019, 11:27:12 AM

I got the bk 7002 for the cyclic of my 766. There is a bit of vertical play between the upper and middle bearing blocks. Maybe a 1/16”. Should I just let the screws do the centering ?


Sent from my iPhone using Tapatalk

Sorry you are having some difficulty. Did you go through the entire frame setup again to see if something might be misaligned? I am running those servos in my 766 and there is not any play. Same on my previous 766. Check the frame before anything else.

Thxs will do


Sent from my iPhone using Tapatalk