Synergy Tech Support
Synergy Electric Helicopters => Synergy 516 => Topic started by: turner2 on December 11, 2017, 07:32:36 PM
-
Any one running Bk5001 servos . It is my understanding hat they have to be spaced out to get the geometry correct . Can anyone confirm that?
-
I’m using 5001 (https://uploads.tapatalk-cdn.com/20171212/efbc80d4a81caa4b9060c354288254f8.jpg)
Sent from my iPhone using Tapatalk
-
I use carbon fiber servo mounts that I cut to size. The correct thickness you are looking for is 3mm
Sent from my iPhone using Tapatalk
-
I hope these help (https://uploads.tapatalk-cdn.com/20171212/dedc80a6d3e0b8fdda6fcc6c630c0d9f.jpg)(https://uploads.tapatalk-cdn.com/20171212/3efbe03d5a0e45903eda099c3072882e.jpg)(https://uploads.tapatalk-cdn.com/20171212/4b4fbf0045d7f0f0c6a22edbe73bce19.jpg)
Sent from my iPhone using Tapatalk
-
I'm using the BK 5001s. No issues, running great with a Hobbywing 120.
-
Thanks for the help!
-
5001 here no problems at all
-
Hmmm....may have to try my hands at printing some spacers.
Sent from my iPhone using Tapatalk
-
Hmmm....may have to try my hands at printing some spacers.
Sent from my iPhone using Tapatalk
Pretty painless...
(https://uploads.tapatalk-cdn.com/20171229/9979eb485b4df01a7a5494e81db087cd.jpg)
(https://uploads.tapatalk-cdn.com/20171229/9663a6862aa239050e5ca728fc172f8f.jpg)
(https://uploads.tapatalk-cdn.com/20171229/6d6eb77cc5a35b6b348e8c4a80b71475.jpg)
(https://uploads.tapatalk-cdn.com/20171229/077bb48e24c318754c229bd6202d17fa.jpg)
Sent from my iPhone using Tapatalk
-
I had these made. Because I didn’t have a 3D printer. But I got one for Christmas maybe I’ll make some up. Did you print with ABS or PLA? They look great. (https://uploads.tapatalk-cdn.com/20171229/b34f20b2dd6388fe98364e7945ef263a.jpg)
Sent from my iPhone using Tapatalk
-
Thanks it's just standard PLA.
-
Awesome. I’m going to make some
Sent from my iPhone using Tapatalk
-
Any further info on this? Is there a synergy part for the spacers? Thanks!
Lou
-
Any further info on this? Is there a synergy part for the spacers? Thanks!
Lou
No these are printed parts to align the servos for better geometry. The heli was designed with MkS servos so other brands may have different measurement. If you have a 3D printer or access to one I can send you the stl file.
Or you can order some CF spacers and double up on them like above.
Sent from my iPhone using Tapatalk