Synergy Tech Support

Synergy Electric Helicopters => Synergy 516 => Topic started by: roofcutter1 on May 26, 2019, 11:47:17 AM

Title: plastic ball link with set screw
Post by: roofcutter1 on May 26, 2019, 11:47:17 AM

the ball link with set screw for mixing arms is too big for the steel ball links in the swarth plate. who ever assembles the head needs to take note of this. now I will have to try to mod the right ones, bummer

Title: Re: plastic ball link with set screw
Post by: alan on May 26, 2019, 05:02:35 PM

There are two lengths of the 516 links.
107-099 are the long ones and 107-099A are the short ones for the follower linkages.
Cheers
Alan


Sent from my iPhone using Tapatalk

Title: Re: plastic ball link with set screw
Post by: alan on May 28, 2019, 04:18:25 PM

I realized from your helifreak post you were referring to the links being too large for the balls on the swash.
First question was this a new unopened kit? If that’s the case Again I would contact Matt.

Cheers
Alan


Sent from my iPhone using Tapatalk