May 04, 2024, 11:22:36 PM

Author Topic: Power Switch  (Read 1123 times)

Offline M.Schmavs

  • Full Member
  • ***
  • Posts: 105
Power Switch
« on: September 17, 2019, 11:29:19 PM »
Anyone using a power switch on the 516? The canopy isn't exactly a quick on and off and I don't exactly have a short walk to my tuning table. Thinking about installing one.

Thoughts?

Offline Grimmy

  • Field Representative
  • Full Member
  • ****
  • Posts: 204
Re: Power Switch
« Reply #1 on: September 18, 2019, 08:03:23 AM »
I have a tough time with my canopy as well.  It's getting better though, but I have to have it elevated off the ground, in order for me to see.  I don't run a power switch, as I see it as another thing to fail.  I just take my time, and it's getting easier.

Offline M.Schmavs

  • Full Member
  • ***
  • Posts: 105
Re: Power Switch
« Reply #2 on: September 25, 2019, 02:22:23 PM »
As you say, it does get easier with practice but my barn, where I have my setup table, is about 200 Yards from where I take off. I just didn't want to walk that far with everything powered on because I didn't feel like removing the canopy, haha

I ended up replacing the canopy with a carbon one and as a side effect, it's much more flexible and easy to install/remove. By accident, this little problem is solved for me!

Offline woodscra

  • Newbie
  • *
  • Posts: 47
Re: Power Switch
« Reply #3 on: September 26, 2019, 05:22:01 AM »
From where did you get the carbon canopy?  Any after market canopy attachments that would make it easier?  I don't own one yet.

Offline alan

  • Sr. Member
  • ****
  • Posts: 275
  • Team Helilids
Re: Power Switch
« Reply #4 on: September 26, 2019, 07:07:56 AM »
Team Helilids RC

Offline M.Schmavs

  • Full Member
  • ***
  • Posts: 105
Re: Power Switch
« Reply #5 on: September 26, 2019, 10:41:32 AM »
^That's the one! I got the blue one from Helilids. HUGE discount on them... Looks like they're discontinued on Canomod's website.

~17g lighter than stock too!

Offline alan

  • Sr. Member
  • ****
  • Posts: 275
  • Team Helilids
Re: Power Switch
« Reply #6 on: September 26, 2019, 11:46:37 AM »
Yes. Those will be the last of the carbon ones :-)
Cheers
Alan


Sent from my iPhone using Tapatalk
Team Helilids RC

Offline M.Schmavs

  • Full Member
  • ***
  • Posts: 105

Offline alan

  • Sr. Member
  • ****
  • Posts: 275
  • Team Helilids
Re: Power Switch
« Reply #8 on: September 29, 2019, 06:47:04 PM »
I was referring to my stock. Canomod no longer sells to dealers so once my stock is gone it’s gone.
Cheers
Alan


Sent from my iPhone using Tapatalk
Team Helilids RC

Offline M.Schmavs

  • Full Member
  • ***
  • Posts: 105
Re: Power Switch
« Reply #9 on: September 29, 2019, 07:30:27 PM »
I was on another site and realized... Are you the guy behind Helilids?

I was looking around and saw there are 696's in stock were others do not have it, Synergy is the main brand supported, etc., ...Looks like I've been shopping at the wrong stores!

I'd be happy to give Helilids more business knowing what I know now!

Offline alan

  • Sr. Member
  • ****
  • Posts: 275
  • Team Helilids
Re: Power Switch
« Reply #10 on: September 29, 2019, 10:44:43 PM »
That would be Me.  Synergy is the only Heli Brand I handle. Plus all the other goodies we need :-)
I know Synergy!
Cheers
Alan


Sent from my iPhone using Tapatalk
Team Helilids RC

Offline M.Schmavs

  • Full Member
  • ***
  • Posts: 105
Re: Power Switch
« Reply #11 on: September 30, 2019, 03:11:20 PM »
In that case, I've been wasting my time at other shops! You, Sir, have my business moving forward. You've been a huge help to me on this forum and my first order was handled perfectly and quickly through Helilids. I'm sold!

Offline alan

  • Sr. Member
  • ****
  • Posts: 275
  • Team Helilids
Re: Power Switch
« Reply #12 on: September 30, 2019, 07:24:48 PM »
You are quite welcome! I do try to help where I can. Thank you for your support!

Cheers
Alan
Team Helilids RC