Synergy Tech Support

Synergy Electric Helicopters => Synergy E7SE => Topic started by: Cliff Chmiel on June 12, 2018, 02:17:09 PM

Title: motor
Post by: Cliff Chmiel on June 12, 2018, 02:17:09 PM

I think my e-7se motor has finally died getting very very hot , its a scorpion 4525-520kv I have about 1500 flights on it and it was used before I got it. So god know how many flights on it. What do you guys recommend I getting much better at 3d and pushing it pretty hard, have xnova in my 766, and been happy with it come down cool. Any one have a sale on motors? Cliff

Title: Re: motor
Post by: Cliff Chmiel on June 13, 2018, 09:17:08 AM

thinking may be xnova 4525-530kv or maybe the 4530-500 kv  everone about out of stock amain has these. Cliff

Title: Re: motor
Post by: Chris Sexton on June 14, 2018, 07:02:42 AM

The E7se was designed around the 4525-520 Scorpion motor.  That's what I've always ran.  I hear good things about the XNova for sure!

Title: Re: motor
Post by: Cliff Chmiel on June 14, 2018, 07:27:18 AM

have a scorpion, just wondering if the x nova is better, and witch one? 

Title: Re: motor
Post by: Rodney Kirstine on June 14, 2018, 05:03:27 PM

Quote from: Cliff Chmiel on June 14, 2018, 07:27:18 AM

have a scorpion, just wondering if the x nova is better, and witch one?

Cliff, I ran an Xnova 4530-500 in my E7SE and it's now in my 766.  I couldn't answer which is better because I've never run the Scorpion 4525-520.  I was really happy with the Xnova, obviously, since it's now in my 766. 

Title: Re: motor
Post by: Cliff Chmiel on June 15, 2018, 08:42:28 AM

Power must be great if you put in the 766, Thanks Rodney

Title: Re: motor
Post by: steffgiguere on June 16, 2018, 05:05:58 AM

I've also got around 1300 flights on a Scorpion 4530-500. Scorpion sure stands the test of time.

Title: Re: motor
Post by: Rob Cherry on June 24, 2018, 12:36:06 PM

Motors don't really "wear out". Unless you have internal temps above 350F or so, the magnets will never loose their magnetic properties and the coatings on the windings won't melt. Replace the bearings occasionally and they will last for ever. I have scorpions that are well over 5 years old, thousands of flights, they still run like new. Some have even seen water, fire and more! :)

Sounds like you've just put more load on the motor as you've progressed over the years. I'd suggest dialing it back a bit with more efficient collective management, or get a bigger motor.

I love my 4525-520 in 700 electrics!

Sent from my XT1254 using Tapatalk

Title: Re: motor
Post by: Cliff Chmiel on June 27, 2018, 09:56:26 PM

thank Rob, must just be bearing.

Title: Re: motor
Post by: Cliff Chmiel on July 03, 2018, 08:02:16 AM

got 4 flights on this xnova now, Im happy with it pulls great very smooth, and comes down cooler then the scorpion. Did order new bearing then I will have a back up. Cliff

Title: Re: motor
Post by: Rob Cherry on July 03, 2018, 08:11:25 AM

Quote from: Cliff Chmiel on July 03, 2018, 08:02:16 AM

got 4 flights on this xnova now, Im happy with it pulls great very smooth, and comes down cooler then the scorpion. Did order new bearing then I will have a back up. Cliff

Good deal! Yeah, the 4530 XNOVA is a larger motor so it's no surprise that it runs cooler in the same heli. Glad you're all set.

Sent from my XT1254 using Tapatalk

Title: Re: motor
Post by: Cliff Chmiel on July 03, 2018, 01:35:54 PM

Thanks guys, all my ships 516, e-5s, e7se, and 766 are all flying great now.

Title: Re: motor
Post by: Rodney Kirstine on July 04, 2018, 09:42:55 AM

Nice!