Synergy Tech Support
Synergy Nitro Helicopters => Synergy N5 / N5c => Topic started by: bgymr on May 05, 2016, 02:49:41 PM
-
So the bearing is a 10x19x6. Mine is a little notchy. I don't have a spare but have a few 10x19x5. I don't see the big deal in a mm to limp by until I order my next order.
I looked and the Gobby 570, Logo 600sx and trex 600 all use a 10x19x5 top main bearing.
I expect it to last less, but I don't see a hurt in it. Any input?
-
the balls in the 6mm are larger. the n5c only having 2 main bearing blocks instead of 3, it needs the stronger/larger bearings.
it can also cause miss alignment issues with the large and small spur gears (1mm to be exact :) )
-
I agree with Mike, You only need to replace the correct size bearing for the N5c. Nitro tends to Vibrate , with that you will have a lot of bearing movement if not the correct one.