Synergy Tech Support

Synergy Electric Helicopters => Synergy 766 => Topic started by: Grubscrew on February 17, 2017, 02:46:34 AM

Title: Synergy 766 Tail Kick
Post by: Grubscrew on February 17, 2017, 02:46:34 AM

Hi all,

Looking for some help with my 766 tail. I absolutely love flying this machine but the tail is letting me down atm. I am finding the tail will kick 30 deg to the right (ie: counterclockwise or with the torque) whenever I do a hard, sudden full pitch climbout. Windy conditions and poor collective management also seem to bring the tail undone at times.

My setup is as follows:
766mm Setup
Xnova XTS 4530-480kv
Kosmik 200A Gov
Vbar Silverline 6.0 (VControl)
14S 5000mah
Futaba BLS276SV Tail
116mm Rail Tails
Running 1950RPM

I posted this on Helifreak after someone with a very similar setup had the same problem. I have since installed the speed up tail gear and noticed a marked improvement, but the problem is still present. I have tried adjusting everything in the expert Vbar tail controls to no avail.

Any suggestions?

Link to helifreak thread: http://www.helifreak.com/showthread.php?t=765265 (http://www.helifreak.com/showthread.php?t=765265)

Title: Re: Synergy 766 Tail Kick
Post by: Danny Dugger on February 17, 2017, 05:09:30 AM

I have one 😉 lol

Title: Re: Synergy 766 Tail Kick
Post by: Grubscrew on February 17, 2017, 05:20:50 AM

Apart from ditching the Kosmik ;)

Title: Re: Synergy 766 Tail Kick
Post by: Wolf51 on February 17, 2017, 02:43:08 PM

Grubscrew are you sure you sized your links?

Sent from my GT-I9507 using Tapatalk

Title: Re: Synergy 766 Tail Kick
Post by: Grubscrew on February 17, 2017, 04:36:30 PM

I did not on the tail no, as I found it moved very freely from scratch.

Title: Re: Synergy 766 Tail Kick
Post by: Grubscrew on February 18, 2017, 06:11:36 AM

Solved my issue in this thread on helifreak: http://www.helifreak.com/showthread.php?t=773558 (http://www.helifreak.com/showthread.php?t=773558)

Title: Re: Synergy 766 Tail Kick
Post by: Danny Dugger on February 18, 2017, 08:20:30 PM

Thats great to hear!