Synergy Tech Support
Synergy Electric Helicopters => Synergy E5 => Topic started by: NKY Heli Guy on December 10, 2012, 01:40:45 PM
-
Has anyone tried a swash plate leveling tool that works on the e5. Type you put on the shaft that is
Sent from my iPhone using Tapatalk
-
I have this one, works great!
http://www.readyheli.com/LEVELER2-T-Rex-600E600N550Synergy-N5-Swashplate-Leveler-by-Trueblood-Engineering-V2_p_34922.html (http://www.readyheli.com/LEVELER2-T-Rex-600E600N550Synergy-N5-Swashplate-Leveler-by-Trueblood-Engineering-V2_p_34922.html)
-
Ralph's Synergy Swash leveler works fine on the E5. Just don't need the washout phasing part.
http://www.fblrotors.com/FBL-Swashplate-Tool-Bonus-includes-Synergy-blade-holder_p_440.html (http://www.fblrotors.com/FBL-Swashplate-Tool-Bonus-includes-Synergy-blade-holder_p_440.html)
-
+1 to what Chris said
Rich
-
I also uses Ralph's leveler. Any 10mm shaft leveler should work ok though.
-
Practically any 10mm leveler would work but, once you fly the E5 you are going to want a E7. ;D Might as well get the leveler from Ralph and have the integrated swash driver alignment tool for the E7 to boot.
Rich
-
Good point! I already want E6 and E7... it's been so fun just building this beast. Huge Synergy fan!
-
There should be a list if all the small things that are needed such as the swash leveler.
-
There should be a list if all the small things that are needed such as the swash leveler.
See thread for tools and supplies: http://synergyrchelicopters.com/forum/index.php?topic=1195.0 (http://synergyrchelicopters.com/forum/index.php?topic=1195.0)
Rich
-
Anybody tried one of these? I'm considering:
http://www.helidirect.com/swashplate-leveler-10mm-w-pom-inside-t-rex-550e600-and-all-50-size-helis-p-18424.hdx (http://www.helidirect.com/swashplate-leveler-10mm-w-pom-inside-t-rex-550e600-and-all-50-size-helis-p-18424.hdx)
Only 12 bucks, I just worry if the "POM" inside is true to spec.
-
Anybody tried one of these? I'm considering:
http://www.helidirect.com/swashplate-leveler-10mm-w-pom-inside-t-rex-550e600-and-all-50-size-helis-p-18424.hdx (http://www.helidirect.com/swashplate-leveler-10mm-w-pom-inside-t-rex-550e600-and-all-50-size-helis-p-18424.hdx)
Only 12 bucks, I just worry if the "POM" inside is true to spec.
I use one (except mine is the red version) and it works on the E5 just fine.
-
Anybody tried one of these? I'm considering:
http://www.helidirect.com/swashplate-leveler-10mm-w-pom-inside-t-rex-550e600-and-all-50-size-helis-p-18424.hdx (http://www.helidirect.com/swashplate-leveler-10mm-w-pom-inside-t-rex-550e600-and-all-50-size-helis-p-18424.hdx)
Only 12 bucks, I just worry if the "POM" inside is true to spec.
I use one (except mine is the red version) and it works on the E5 just fine.
Thanks!
-
I use one (except mine is the red version) and it works on the E5 just
I have the red also and it seems to be pretty true. works great as far as I can tell.