Synergy Tech Support
Synergy Nitro Helicopters => Synergy N5 / N5c => Topic started by: tacomaster on June 14, 2016, 12:53:01 AM
-
Well, i got my kit in and ive started on the build. I have a couple of questions, the most important is the tail pitch slider. It came assembled with the lock ring on it. After going through and redoing all the parts that came assembled, i doubt it is done correctly. So my question is, is there a good way to pull this lock washer off without destroying it?
My kit was missing the tiny 5mm shim in the tail grip so i have order a couple of parts anyway, i just wanna know if i need to pull this thing apart, loctite the bushing and stuff or if i can just clean it and epoxy the the end of the ring on and let it be.
Just dont want this thing to fall apart in flight lol
Thanks.
-
http://www.synergyrchelicopters.com/forum/index.php?topic=1301
-
No the lock ring is fine. You're good to go.
Sent from my iPhone using Tapatalk
-
http://www.synergyrchelicopters.com/forum/index.php?topic=1301 (http://www.synergyrchelicopters.com/forum/index.php?topic=1301)
that is not the pitch slider he is talking about. he is talking about the standard one with the lock ring, not the metal one that you need to disassemble and locktight.
-
mine is metal and it is smooth, ill just put some epoxy around it to be safe.
thanks guys
-
I have over 400 flights on my N5c with the lock ring with no issues whatsoever. The epoxy is not needed but if it makes you feel better just be easy on the application...just enough.
Gabe ;)