Synergy Tech Support

Synergy Nitro Helicopters => Synergy N5 / N5c => Topic started by: tacomaster on June 14, 2016, 12:53:01 AM

Title: N5c build question
Post by: tacomaster on June 14, 2016, 12:53:01 AM

Well, i got my kit in and ive started on the build. I have a couple of questions, the most important is the tail pitch slider. It came assembled with the lock ring on it. After going through and redoing all the parts that came assembled, i doubt it is done correctly. So my question is, is there a good way to pull this lock washer off without destroying it?

My kit was missing the tiny 5mm shim in the tail grip so i have order a couple of parts anyway, i just wanna know if i need to pull this thing apart, loctite the bushing and stuff or if i can just clean it and epoxy the the end of the ring on and let it be. 

Just dont want this thing to fall apart in flight lol


Thanks.

Title: Re: N5c build question
Post by: wbfines on June 14, 2016, 05:03:27 AM

http://www.synergyrchelicopters.com/forum/index.php?topic=1301

Title: Re: N5c build question
Post by: Chris Sexton on June 14, 2016, 06:06:14 AM

No the lock ring is fine.  You're good to go.


Sent from my iPhone using Tapatalk

Title: Re: N5c build question
Post by: Mike Spano on June 14, 2016, 07:27:46 AM

Quote from: wbfines on June 14, 2016, 05:03:27 AM

http://www.synergyrchelicopters.com/forum/index.php?topic=1301 (http://www.synergyrchelicopters.com/forum/index.php?topic=1301)

that is not the pitch slider he is talking about. he is talking about the standard one with the lock ring, not the metal one that you need to disassemble and locktight.

Title: Re: N5c build question
Post by: tacomaster on June 15, 2016, 01:10:59 AM

mine is metal and it is smooth, ill just put some epoxy around it to be safe.

thanks guys

Title: Re: N5c build question
Post by: Gabriel Sandoval on June 16, 2016, 10:32:46 PM

I have over 400 flights on my N5c with the lock ring with no issues whatsoever. The epoxy is not needed but if it makes you feel better just be easy on the application...just enough.

Gabe ;)