Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email
?
Home
Help
Search
Login
Register
May 13, 2024, 02:07:07 AM
Synergy Tech Support
»
Other Manufacturer
»
General Heli Support
»
Setting Charge Limits/Parameters
« previous
next »
Print
Pages: [
1
]
Author
Topic: Setting Charge Limits/Parameters (Read 2061 times)
cml001
Field Representative
Synergy Veteran
Posts: 684
Setting Charge Limits/Parameters
«
on:
June 14, 2016, 05:19:18 PM »
U know what guys... Something just popped in my head... When setting up the chargers parameters.. Let's say on a single 5000mah pack.. And u want the cap the amount it puts back in on a charge.. Say 4800mah.. If it reaches that 4800.. It will stop the charge. So.. ?.. If u are parallel charging 2 5000mah packs.. Would u double the 4800mah figure? It's not seeing 2 packs.. It is charging at a higher amperage.. So does mean it's counting the shared mah being put back in or what? Think I know the answer.. But what do u guys think?
Logged
Clay
I can fly helicopters... Upside down!
Robert "Full" Montee
Full Member
Posts: 141
Re: Setting Charge Limits/Parameters
«
Reply #1 on:
June 14, 2016, 05:33:30 PM »
Correct, if you are parallel charging you need to set the limit to a sum of the mah for the batteries you are charging.
For example if you are charging 6 batteries that are 6S 5000mah then set the limit around 30000mah.
«
Last Edit: June 15, 2016, 12:24:25 AM by Robert "Full" Montee
»
Logged
Robert "Full" Montee
Team Synergy / Team Futaba
https://robertstechlib.blogspot.com
cml001
Field Representative
Synergy Veteran
Posts: 684
Re: Setting Charge Limits/Parameters
«
Reply #2 on:
June 14, 2016, 06:34:06 PM »
Thought so... Kool.. Thanks bud!
Logged
Clay
I can fly helicopters... Upside down!
Print
Pages: [
1
]
« previous
next »
Synergy Tech Support
»
Other Manufacturer
»
General Heli Support
»
Setting Charge Limits/Parameters