Synergy Tech Support

Synergy Nitro Helicopters => Synergy N7 => Topic started by: sawacs on September 27, 2016, 08:45:44 PM

Title: N7 With 716 F3C Blades
Post by: sawacs on September 27, 2016, 08:45:44 PM

I have an N7/105hzr on the way and would like to know if the 716 F3C blades along with 106 rail tail blades would work for the project vs the Rail 696's?  I prefer nice relaxing sport flying, auto rotations and lazy aerobatics.

Would the VTX 717's also be a viable option?

Thanks,

Shawn

Title: Re: N7 With 716 F3C Blades
Post by: Chris Sexton on September 28, 2016, 07:01:01 AM

Hey there!

YES! if you like big air, float and tons of autos! The 716s are a great option!  The None F3C would work great too.

Title: Re: N7 With 716 F3C Blades
Post by: Cliff Chmiel on September 29, 2016, 07:28:52 AM

I have the e7se, with the 716 and is autos great, floats at the end of the auto, mine are the non f3c.

Title: Re: N7 With 716 F3C Blades
Post by: sawacs on October 05, 2016, 03:53:12 PM

Thank you gents for the information.  Since I could not change the order, I'll start with the 716's!

Cheers,

Shawn

Title: Re: N7 With 716 F3C Blades
Post by: turner2 on December 19, 2016, 07:29:17 AM

So the 716 will clear the tail blades. I have 106 on the tail do they need to be changed to 116?

Title: Re: N7 With 716 F3C Blades
Post by: Gabriel Sandoval on December 26, 2016, 11:45:30 AM

Nope the N7 fly's just fine with the 106's as that's my setup  716/106 Rails YS .91SRX Tareq, Hatori YS 1.20 Pipe.