Synergy Tech Support
Synergy Nitro Helicopters => Synergy N5 / N5c => Topic started by: turner2 on December 08, 2016, 04:41:44 PM
-
Do N5's build tail heavy like the N7
-
Mine have never been. I typically use a 2200mah pack. On the N7 a 4000mah balanced it out well.
Sent from my iPhone using Tapatalk
-
I use a 3600mah RX pack on the N5C... it's right on!
-
I fly 2550ma on my n5c and it's prefect with the switch glow up front too.
On my n7, WITHOUT the canopy I use (2) 3600ma packs and it's perfect, WITH the canopy (1) is perfect. Again, with the switch glow up front.
-
Mine fly perfectly .
-
I use a 3600 pack in my N5c, a 5000 pack in my n7. Perfect balance in both choppers.
Sent from my iPhone using Tapatalk
-
For me I never had an issue, back in the early days of the N5c belt through the Torque tube version I ran TP 1900 Mah. Now days I run a 2200 only because my trusty 1900 was retired. I run an E7SE tail box on my N7 and run a 5000mah Rx batt to offset CG on it.
K
-
The key to getting the CG right is getting the right battery. The N7 was designed around the Thunder Power 3800 RX pack Its a relatively square so it keeps the weight right at the very front of the heli. The N5c is a little more forgiving because you can easily move the battery further forward if you need to. I always ran a 2200 MAh pack on my N5c and it balanced nicely.