Synergy Tech Support
Synergy Nitro Helicopters => Synergy N5 / N5c => Topic started by: seldred on October 13, 2011, 11:01:59 AM
-
Got a set of these from Matt this weekend, and man are they awesome! They simply thread into the existing canopy stand offs and you're good to go! They hold the canopy on well and they are pushing it out from the main gear some as well as eliminating any denting from the canopy being tightened down too much from the thumb screws. Part number is 710-100.
Chem 'em out! 8)
[attachment deleted by admin]
-
Will these work for the N5c also? I am dying to get something quicker than unscrewing 4 of the mounts everytime. Only frustrating thing on the bird for me. Since I have to change the battery every 2 or 3 flights I have the potential to get frustrated a lot. :P
-
Yes they work for both the N5 and N5c. I have them installed on my N5c.
-
Would these possibly work on the N9 canopy? I have SE thumb screws but these would be nice.
Thanks
Scott
-
I cannot see why not, might need to ream out the canopy grommet hold a little.
-
When will these be available and were at
-
They work well with Hatori pipes.
I've seen guys have troubles using them with the OS Power Boost.
Thanks,
Matt
-
i just intalled mine they dont fit properly using a funtec b320 pipe is close might have to use a spacer or something like that.
-
i just intalled mine they dont fit properly using a funtec b320 pipe is close might have to use a spacer or something like that.
Spacer on the pipe or on the mount
Sent from my iPhone using Tapatalk
-
i just intalled mine they dont fit properly using a funtec b320 pipe is close might have to use a spacer or something like that.
Spacer on the pipe or on the mount
Sent from my iPhone using Tapatalk
on the pipe to bring it out a bit more or i might cut the standoff down a couple of mm to make it miss the pipe.
-
i have just cut 5mm of the stand off pipe side only to make the canopy fit on without hitting the pipe fits great hopefully there will be an upgrade for it.
-
I just modified a set of quick uk 600n and 600e magnetic mounts to fit I like the way they mount to the canopy no different rubber no modifying the holes in the canopy I will post pics later
Sent from my iPhone using Tapatalk
-
Trying to get the canopy to relax a bit but it clears the pipe now
Sent from my iPhone using Tapatalk
[attachment deleted by admin]
-
Trying to get the canopy to relax a bit but it clears the pipe now
Sent from my iPhone using Tapatalk
u say modify mate how did u mod them and what pipe are u using.
-
Put them on a lathe and cut about 3/4 off the base had to drill the hole deeper and run a tap down it also.
It's brand new so the canopy is really stiff and wanting to kick out a bit the magnets are really strong so I don't think I will be a problem.
I have the funtec pipe it seems to be bigger than the hatori
Sent from my iPhone using Tapatalk