Synergy Tech Support

Synergy Nitro Helicopters => Synergy N5 / N5c => Topic started by: DDuzinski on January 30, 2012, 04:47:57 AM

Title: N5c Binding on bellcranks and each frame diff. sizes
Post by: DDuzinski on January 30, 2012, 04:47:57 AM

Well I noticed the frames are 2 diff. sizes.
thought what the heck go on, now the bell cranks bind... cant seems to get it to stop
could it be the diff. frame sizes?
Please help

Title: Re: N5c Binding on bellcranks and each frame diff. sizes
Post by: Kevin Feil on January 30, 2012, 05:30:55 AM

D,
shoot us a pic in regards to what you are talking about? I have yet to see any Issues at all with anything quiet frankly with this machine, and be a little bit more descriptive as far as what is "Different" about the frames? I will be out of town for the remainder of the week. So please email me at   hwood3160@yahoo.com  This will at least allow us to talk via email since it comes straight to my phone. I will PM you my cell number. Don't Hesitate to use it!! ;)

Kevin

Title: Re: N5c Binding on bellcranks and each frame diff. sizes
Post by: DDuzinski on January 30, 2012, 05:59:33 AM

Yeah one of my frames are about 1.5mm bigger than the other,
I am going to see if Matt will exchange the frame.

Title: Re: N5c Binding on bellcranks and each frame diff. sizes
Post by: seldred on January 30, 2012, 08:12:34 AM

Hey man, shoot me a message later today on facebook and we can walk through the heli with you see if we can't figure out what the binding issue is. As far as the frame thickness is concerned, that is a little strange that one is 1.5mm thicker... do you cave a set of calipers that you can get an exact difference on them?

Best Regards,
-Steve

Title: Re: N5c Binding on bellcranks and each frame diff. sizes
Post by: DDuzinski on January 30, 2012, 09:17:14 AM

They are about 1.3 off

Title: Re: N5c Binding on bellcranks and each frame diff. sizes
Post by: DDuzinski on January 30, 2012, 01:50:02 PM

Thank you for your help guys,
I am getting a replacement frame side!
Thanks matt for the great service!!!

Title: Re: N5c Binding on bellcranks and each frame diff. sizes
Post by: seldred on January 30, 2012, 02:28:29 PM

Awesome! Hope you get to maiden it this weekend!! ;D

Title: Re: N5c Binding on bellcranks and each frame diff. sizes
Post by: Kevin Feil on January 30, 2012, 08:02:23 PM

Daniel,

Pay close attention to the tips and tricks post under the N5 and N5c. Pay REAL CLOSE ATTENTION to the Tail set up in regards to the tail shaft measurment. Good luck and let us know if we can help..

Kevin

Title: Re: N5c Binding on bellcranks and each frame diff. sizes
Post by: Matt Botos on January 30, 2012, 10:42:31 PM

Daniel,

1.5mm thicker would give you a total frame side thickness of 3.5mm.
The pictures you sent me showed your calipers reading 2.5mm??
I've never seen a frame side have this problem, next time you see Marrio please give
the frame side in question to him. I'd like to take some measurements for myself.

Matt