May 03, 2024, 02:37:22 AM
« previous next »
Pages: [1]

Author Topic: Bad parts out of the box.  (Read 2007 times)

Offline Jabird

  • Newbie
  • *
  • Posts: 21
  • Started flying a GMP Cricket in 1984. Still Going!
Bad parts out of the box.
« on: October 29, 2012, 12:42:41 AM »
Very sad, brand new start shaft was bent. didnt realize it was bent. Took out the oneway in the clutch. :(
swash plate heim ball notchy, not smooth from the stock short balls, took swash apart to fix.
Torrington one way bearing installed wrong in main hub. No biggie, just flipped hub.. But still shouldn't happened.
Haven't even flown it yet and im 40$ into fixing it.. I must have gotten a friday kit :)
Other then that, totally bad ass kit. Cant wait to fly it.... One day.
« Last Edit: October 29, 2012, 01:48:56 AM by Jabird »
Logged
Synergy N556, pbiii, 55hzr, xpert, ikon
In the past,
Synergy N5c, CGY750, Futaba 12z, 55hz
Blade 130x ,Cricket, Concept30 dx, SRX, Ergo, Raptor30, 50, and 60, Xcell pro II, Xcell CT, Xcell SE 99,XL Fury pro, XL fury extreme, Robbe milli, Trex 250, 450, 500, Trex 600, shogun, helimax 40

flyalan

  • Guest
Re: Bad parts out of the box.
« Reply #1 on: October 29, 2012, 05:59:58 AM »
Matt will get with you i'm sure. The main gear is designed to go on either way.  Just doesn't always match the pic in the manual.  I have never heard if anyone having a bent starter shaft out of the box.  That one is a fluke?
I did alert Matt.

Cheers,
Alan
Logged

Offline Matt Botos

  • Synergy Hero
  • **
  • Posts: 1573
    • Matt Botos
Re: Bad parts out of the box.
« Reply #2 on: October 29, 2012, 12:10:00 PM »
Jabird,

Send me an email at matt@mattbotos.com and we can sort through whatever you need to get the N5c working correctly.

Thanks!

Matt
Logged

Offline Jabird

  • Newbie
  • *
  • Posts: 21
  • Started flying a GMP Cricket in 1984. Still Going!
Re: Bad parts out of the box.
« Reply #3 on: October 29, 2012, 01:38:46 PM »
message sent, im not too worried about anything, i already replaced the parts.
Logged
Synergy N556, pbiii, 55hzr, xpert, ikon
In the past,
Synergy N5c, CGY750, Futaba 12z, 55hz
Blade 130x ,Cricket, Concept30 dx, SRX, Ergo, Raptor30, 50, and 60, Xcell pro II, Xcell CT, Xcell SE 99,XL Fury pro, XL fury extreme, Robbe milli, Trex 250, 450, 500, Trex 600, shogun, helimax 40

Offline Jabird

  • Newbie
  • *
  • Posts: 21
  • Started flying a GMP Cricket in 1984. Still Going!
Re: Bad parts out of the box.
« Reply #4 on: October 29, 2012, 01:44:44 PM »
Quote from: flyalan on October 29, 2012, 05:59:58 AM
The main gear is designed to go on either way.  Just doesn't always match the pic in the manual.  I have never heard if anyone having a bent starter shaft out of the box.  That one is a fluke?
I did alert Matt.

Cheers,
Alan
it was the hub i flipped, i know the main can go either way, it worked with the hub flip. I guess the dimensions are the same right side up or upside down, so I guess it doesn't matter. I know pictures dont always match. thats why they make addendum's. once again, no biggie. start shaft.. I know, very rare, I have never had one bent on any of my choppers. Theres always the possibility I did it. with the bottom of the start shaft hollow, i could see how easily it could become damaged if you dont put engine in right. I mean it could of been my fault. but i dont think i did anything to bend it.. However, water under the bridge.. fixed now. Oh yeah, i also took the motor shims out, makes the alignment way better..
« Last Edit: October 29, 2012, 01:55:27 PM by Jabird »
Logged
Synergy N556, pbiii, 55hzr, xpert, ikon
In the past,
Synergy N5c, CGY750, Futaba 12z, 55hz
Blade 130x ,Cricket, Concept30 dx, SRX, Ergo, Raptor30, 50, and 60, Xcell pro II, Xcell CT, Xcell SE 99,XL Fury pro, XL fury extreme, Robbe milli, Trex 250, 450, 500, Trex 600, shogun, helimax 40
Pages: [1]
« previous next »