Synergy Tech Support

Synergy Nitro Helicopters => Synergy N5 / N5c => Topic started by: Brandon Bartolomucci on September 19, 2011, 08:29:01 AM

Title: Roll Call
Post by: Brandon Bartolomucci on September 19, 2011, 08:29:01 AM

Hi all,

There's a thread in the N9 sub-section similar to this so I thought it might be fun to do the same here. If you have an N5 or N5c check in! If you have more, why not list how many you have and the equipment on them! Just kind of a fun poll and reference point for the equipment that we know works well on these birds.

I am the proud owner of an N5c.

O.S. 55 HZ-Hyper
Outrage 55 Pipe
Push Glow ignitor
Perfect regulator
JR 8717's on cyclic (non-HV version)
Futaba 9650 on throttle
Futaba BLS251 on tail
GY-701 Governor
Beast X at version 3.0
Rail main blades (soon to be Rail tail blades)
O.S. Bubbless clunk

All run by the DX8 and AR8000.

Title: Re: Roll Call
Post by: seldred on September 19, 2011, 08:37:32 AM

+1
O.S. 55HZ-R
Hatori SAB 55
3 BLS 253
BLS 251
Vbar 5.2 (using gov mode)
9650 throttle
Switch glo with push button
Rail 606 main
Rail 96 tail

Title: Re: Roll Call
Post by: Matt Botos on September 19, 2011, 10:57:51 AM

N5c

O.S. 55HZ-R
Hatori SAB 55
BLS 255 Cyclic servos
BLS 256 Tail servo
CGY750
9650 throttle
Rail 606 main
Rail 96 tail

Title: Re: Roll Call
Post by: churchyj on September 19, 2011, 04:37:43 PM

N5C

O.S 55HZR
SAB 55
Futaba 255/256 HV Servos
Futaba 9650 on throttle
CGY750 FBL with R6203SB
Pushglo
DH611 Blades (until Rail's arrive)
Hyperion 6.6 2100LIFE though a Perfect reg soft switch
Lynx fuel magnet MOAS

Title: Re: Roll Call
Post by: Yanick Larouche on September 19, 2011, 05:40:49 PM

Hi Guys !

N5 Modify to FBL

YS56SR
MP5 50SB
Rail 606
Align Ds610
Futaba 9650 on throttle
CGY750 FBL with R6203SB
Rail for tail
No Regulator for Head.(Ds610 at 2s lipo)
Spektrum regulator (2 in and 2 out) for throttle and gyro.

Thank's !!
Yan
 :)





 

Title: Re: Roll Call
Post by: Kevin Feil on September 19, 2011, 08:04:59 PM

I have To many N5's To List lol, I'll Keep it short

N5c

YS56sr
JR8717 vs cyclic
9650 throttle
Bls 256 tail
V-Bar 5.1
OutRage Exhaust
Rail 606                                                                                                                                             96mm Rail Tails

I absolutely love this Heli

Title: Re: Roll Call
Post by: churchyj on September 20, 2011, 03:23:45 AM

Do you guys find the YS56 is comparable to the OS55HZR? They do not have a big following here as they never seem to put out the same HP.

Title: Re: Roll Call
Post by: Brandon Bartolomucci on September 20, 2011, 06:05:53 AM

I unfortunately have only had experience with the older O.S. 50 hypers before this new 55. Kevin do you have any input? You know all this stuff!  :)

Title: Re: Roll Call
Post by: Kevin Feil on September 20, 2011, 12:36:41 PM

I have run mostly OS engine in both my helis and Airplanes. I recently retired a motor OS 50 Hyper after 30 gal fuel, Now this motor was used by a friend of mine and I got it from him when he went all electric, I ran roughly 15 gal of that 30 through it myself and It ran great, it was time for rear bearings. I recently switched to Ys 56's due to just wanting to try something new. I have been more than pleased with them as well as the OS's.

 I have Never run an OS 55hz but have owned two and sold them before they were ever installed. But I have seen all of the Synergy Gang Run them including Matt and the OS 55 hz's are Awsome. Like any engine it is trying to find that sweet spot in Peak performance, I tend not to String mine out do to I would Rather Buy Synergy Heli's and Not replacement Motors lol. I run mine rich of peak and i do mod Mine as well. (SKUNK WORKZ) I can't tell you what I do, lol. I really Believe in both Products.. You replace Rear bearings in YS as well as OS, To me OS is easier to Tune and when breaking one in Out of the Box I fly it Like I stole It. The YS's require a bit more Tuning and like to be run on the rich side. Personal prefrence i guess.

 Both engines are Great, Let's Face it "IF MATT FLIES OS and we have seen how Matt Flies, And Matt Does Have alot more Skill Then You have Seen on these Videos, He can Make one SCREAM FOR MERCY When The Crowds are gone and The gloves come off, He Can Flat Lay The SMACK Down, He is truly a Gifted Pilot!! Then you know the OS 55HZ's  gotta be good !! I on the other hand  just wanted to try something a bit Different. 
Once again this is just my opinion. You can't go wrong with either, Os and Synergy Marry very Well!!

Kevin

Title: Re: Roll Call
Post by: churchyj on September 20, 2011, 04:23:30 PM

Hi Kevin,

Most Australians will run O.S in the 55 sizes and the majority will run O.S for the 90 sizes but there is still a good mix of YS, particulary now the 120 is out.

I'm going to try a YS56 just because i want to, i'm still expecting the O.S to be better.

Cheers,

Justin

Title: Re: Roll Call
Post by: Kevin Feil on September 20, 2011, 06:24:33 PM

Hey Justin,

 you will Like it, Once you get it dialed in she is a beast, like I mention earlier, Matt and the Gang fly OS55hz's and they are insane, I have never flown one. The YS with a Outrage pipe runs great as well as a Hatori. I don't fly Smack so to speak. I leave that to Matt. I like big air maneuvers as well as fast inverted and very low inverted and haven't been let down yet by my YEs. My N9's have OS 91 hz and they are insane!!! I run 14 degrees of pitch and I swear they will take anything "I" can give them. Good luck with the Change and Keep me posted.

Cheers,

Kevin

Title: Re: Roll Call
Post by: James Mineo on September 20, 2011, 11:58:45 PM

Hey guys!

N5c

O.S. 55HZ-R
Hatori SAB 55
BLS 255HV Cyclics
BLS 251 Tail w/Infinivation in-line reg.
9257 throttle w/Infinivation in-line reg.
R6203SB Rx
TP G6 Pro Lite 1900 Rx pack
CGY750
Rail 606 mains
Rail 96 tails

Awesome machine!!

Jamie

Title: Re: Roll Call
Post by: Jerry Kovar on September 21, 2011, 07:45:29 PM

Hey Peeps...


My N5c
Jr 8717
Futaba BLS 251
Futaba 9257
Titan step down for the throttle and the tail
Vbar 5.1
Ys 56... Originally going to run a os 55, but decided to try something new...   Running great with gobs of power
Hatori pipe
I run the 1350 MA pulse packs 2s strait power to the vbar.  3 flights on them and they are LIGHT!
Rail 606
rail 96
and of Course ROTOR RAGE MASTERS BLIND... Yessssss YEEEESSSSSS

Title: Re: Roll Call
Post by: Biggles on September 22, 2011, 07:09:32 AM

I fly the N5, here's my specs
N5 FBL
OS 55 HZ
Outrage Pipe
BLS 451 cyclic
BLS 251 tail
S9650 throttle
Edge blades [until rails arrive]
TP 2s lipo 3600mha straght in no reg
Lynx fuel magnet MOAS
Explotion fuel from Extreme heli's
Blingboy canopy


[attachment deleted by admin]

Title: Re: Roll Call
Post by: Brandon Bartolomucci on September 22, 2011, 06:30:56 PM

Nice looking canopy! Loving all these specs on everyone's heli.

Title: Re: Roll Call
Post by: Darren Lee on September 23, 2011, 06:05:27 PM

N5c
O.S. 55HZ
Funtech B320
BLS253s on cyclic
9256 on tail
9257 on throttle
AR7100R with Revlimit
BeastX v3
Hyperion 1450mAh 6.6v LiFe

Title: Re: Roll Call
Post by: nwmtech on September 27, 2011, 01:11:26 AM

N5c FBL
BeastX V3
OS55HZ
Funtech B320
AR7100r at 2180rpm
Hyperion 1300mah 2s
BLS 451's
BLS 251
9257 throttle
Rail 606's
Rail 96's

Title: Re: Roll Call
Post by: breezyjr on October 06, 2011, 11:07:31 PM

N5

KDE 60 with matching pipe
Outrage 9188 Cyclics
Outrage 9180 Tail
jr mini HV throttle servo
FBL head
Full sized V-bar blue line with 701 governor sensor
Mavrikk 620 mains
Edge 95
SS screw kit
PushGlo remote glow starter...
TP 2s2p 3800 Rx

Title: Re: Roll Call
Post by: Brandon Bartolomucci on October 07, 2011, 08:27:09 PM

Good stuff in here all the way around. I finally was able to score a set of the Rail tail blades as Experience RC got some in. Can't wait to try them out.

Title: Re: Roll Call
Post by: breezyjr on October 08, 2011, 07:30:50 AM

Quote from: Brandon Bartolomucci on October 07, 2011, 08:27:09 PM

Good stuff in here all the way around. I finally was able to score a set of the Rail tail blades as Experience RC got some in. Can't wait to try them out.

Ditto.... mine will be here Monday, I assume.  But, I can't wait to "hear" the difference between my Mavvrikk blades and the Rail...  I actually order two sets, so if I like 'em, I'll put the other set on my T600.

Synergy and Matt Botos ROCK!

Never seen a Marquee function on a forum before... just had to try it....  hehe

Joe_Breezy

Title: Re: Roll Call
Post by: Ross Lawton on October 12, 2011, 06:05:16 AM

N5 - Flybarred
O.S. 55HZ
Hatori SAB 55 Pipe
BLS 451 Cyclic servos
BLS 251 Tail servo
GY520 Gyro
Spektrum H5000 on throttle
Radix 600SB Main Blades
Radix 92 Tail Blades
Spektrum AR7100R
DX7SE Radio


N5C - Flybarless
O.S. 55HZ-R
Hatori SAB 55 Pipe
BLS 451 Cyclic servos
BLS 251 Tail servo
CGY750 Flybarless System
Spektrum H5000 on throttle
Rail 606 Main Blades
Rail 96 Tail Blades
Futaba 8FG Super Radio

Title: Re: Roll Call
Post by: flyboynellor on November 04, 2011, 12:46:08 PM

N5C FBL
OS 55HZ
Funtech B320
CGY750
Futaba BLS 252 Cyclic
JR DS8900G Tail
Futaba S9650 Throttle
Futaba R6203SB Receiver
Rail 606 Main Blades
CY 93 Tail
Futaba 12FG Radio

Title: Re: Roll Call
Post by: synergy5 on November 04, 2011, 07:59:44 PM

n5 fbl
os 55
outrage 55 pipe
align 610s cyclic
align 650 tail
futaba 9257 throttle
edge mains & tail blades
v-bar-pro-gov
perfect reg


n5c fbl
os 55
funtech b320
bls 452s cyclic
bls 251 tail
9650 throttle
rails all round
v-bar-pro-gov
dualsky reg

Title: Roll Call
Post by: Tommy Wagner on November 04, 2011, 10:28:42 PM

N5c FBL
OS 55HZ-R
Power Boost Pipe
Total G
9257 Throttle
JR 8717
JR 8900G
Rail 606 Main
Rail 96 tail
Gryphon regulator for tail and throttle
Switch glow
Perfect regulator fail safe
Gryphon flag pin switch
Volts 2500 7.4v

Title: Re: Roll Call
Post by: Tradhunt on November 05, 2011, 05:53:07 PM

N5C FBL
YS56SR
Funtech
CGY750(for now I might switch iy over to Vbar)
BLS451's cyclic
8900G tail
Align 520 throttle
Perfect Regulators Safe switch DUO Pro
Outrage 3600
Rail 606 mains
Rail 96 tails

Title: Re: Roll Call
Post by: ghostrider414 on November 29, 2011, 07:46:42 PM

N5C FBL
YS56SR
Funtech
JR8717 X3 cyclic
JR8900 tail
9650 thorttle
VBAR 5.2 Pro
Voltz lifePo4 2100mah 2S6.6V
Rail 606 mains
Rail 96 tails

Title: Re: Roll Call
Post by: Jake on December 04, 2011, 05:09:13 PM

N5C FBL
OS 55HZ-R
Hatori 566
CGY750
Hitec 7965MG's on cyclic
BLS251 on tail
Futaba S9650 throttle
Spektrum 6v regulator
Rail 606 mains
Rail 96 tails
Gryphon on-board glow

Title: Re: Roll Call
Post by: Matt Botos on December 13, 2011, 01:11:34 PM

UPDATE on my N5c

N5c

O.S. 55HZ-R Limited Edition (Black case / Red Head)
OS55 Power Boost II / Hatori SAB55 (Still undecided)
Futaba 6203 RX
BLS 255 Cyclic servos
BLS 256 Tail servo
CGY750
9650 throttle
Rail 606 main
Rail 96 tail
TP 2S 1800mah RX Pack

Title: Re: Roll Call
Post by: jamesc7701 on December 13, 2011, 07:59:20 PM

N5C

YS56sr
outrage hyper pipe
cgy750
edge rotor blades
bls351 cyclic
9256 tail
9650 throttle
push glo

Title: Re: Roll Call
Post by: j bomb on December 28, 2011, 08:46:21 AM

Here's mine:

N5c FBL

engine: KME .60
pipe: KME Powerhouse/Mavrikk .70
FBL: Total G
cyclic servos: Savox 1257TG
throttle servo: Futaba 9650
tail servo: Futaba BLS 251
blades: Rail 606/96
radio: Spektrum DX8
other: Hyperion 2100mAh LiFe battery-unregulated to Total G, Spektrum 5203 regulator for tail servo, PushGlo ignitor

Still on the fence about the KME engine, shows awesome performance at times but runs inconsistently.  I started w/ the KME pipe, but suspected that a baffle might be coming loose so I switched to the Mavrikk.  I didn't really get a chance to thoroughly test the new pipe before the weather got cold. I can't wait until it gets warm again here so I can play with it some more.  If I can't get it to my liking, I may just get a new engine, I hear that YS is working on a 60 of their own....

Title: Re: Roll Call
Post by: p johnston on January 01, 2012, 08:48:56 PM

N5c
Ys 56/SAB55
CGY750
BLS255 cyclic
BLS251 tail
9650 throttle
rail blades Main and tail
TP1900 2c lipo
6203rx
Perfect reg safe switch duo pro

dry weight
7lbs 10oz 8)

Title: Re: Roll Call
Post by: SSerrand on January 01, 2012, 11:21:24 PM

N5c

O.S. 55HZ
O.S. PowerBoost pipe
CGY 750
Futaba 6203SB
FlightPower 8A Voltage Regulator
Futaba BLS 252 cyclic
Futaba 9256 tail
Futaba 9257 throttle
Rail Blades Main and tail
ThunderPower 1900 2s lipo
SwitchGlo remote starter

There's my setup only thing that I would like to change is the pipe. The PowerBoost pipe is alright, but I know I can get more power out of the motor. A little tip that I got for it that helped out a bunch for me is to raise the headspeed to 2150 in idle two. Hopefully after a little spring cleaning I'll be able to afford the hatori. :)

Title: Re: Roll Call
Post by: Kevin Feil on January 02, 2012, 01:49:12 AM

Well I have to say I still Love My N5c and My N9's! But I will Admit that The other Night I was thumbing through some old Vid's and Watched the One where Matt was Flying his N5 over the Pond.. Well I just had to pull one down off the Shelf and Get it airworthy. I'm going old school with the Fly-barred Head and all. Nostalgic I guess. ;)


Old School N5 Blue/Orange Canopy,

OS 50 Hyper
Os Power boost Pipe
Futaba 9257 throttle
JR 8717's
JR 8900 Tail
JR 770 3d Gyro
CY Stubs
Rail Blades
Standard Synergy Plastic Tails

*This is for My Nephew, He is 5 yrs old and won't stop talking about Heli's so why not Teach him!!lol

Kevin

Title: Re: Roll Call
Post by: nickwap on January 02, 2012, 09:07:54 AM

+1 Here,
I just put together a N5c to go with my N9,
I cannot wait to see a N9c  ;D this N5c was just a pleasure to build  :)

Hers my specs

YS56/Hatori
JR8717's on cyclics
JR8900G on the tail
Beastx
PushGlow
Rail Mains and Tails

Title: Re: Roll Call
Post by: michaelrc51 on February 17, 2012, 08:25:14 PM

I picked mine up used, well it had 4 flights on it!

N5c
OS 55 HZ-R
Hatori SAB55
Futaba CGY750
Futaba R6203SB
Futaba BLS252 on cyclic
Futaba 9257 on throttle
Futaba BLS251 on tail
Scott Gray Reactor X2
Switchglo Pro
Hyperion 2s 2100 lipo
Rail 606s on main and Rail 96s on tail
Insane Canopies custom canopy

Title: Re: Roll Call
Post by: Kevin Feil on February 17, 2012, 11:33:32 PM

Michael,

 Looks like you Bought a Very Nice Heli!! Great Set up! Welcome to the Synergy Family. ;)

Kevin

Title: Re: Roll Call
Post by: Scott Anderson on February 19, 2012, 12:48:05 AM

 SYNERGY N5C ..... Jr11X, R921, SBE-1,  CGY-750,  Ys.56 SR ... 8.4V no Reg or switch....;-)

Title: Re: Roll Call
Post by: Hendo67 on February 20, 2012, 12:21:36 AM

N5C
Spektrum/BeastX
JR8717 Cyclics
Outrage BLS9088 tail
Futaba 9257
Throttle Jockey
OS 55HZ
Funtech 320
Rail 606
Rail 96
Titanium turnbuckles

Title: Re: Roll Call
Post by: Kevin Dalrymple on April 19, 2012, 09:15:51 PM

N5C
Futaba 750
BLS 255
Outrage 9088 on the tail
JR 3717 HV on the trottle
OS 55HZ
Funtec B320
Rail 606 and 96

Really liking this heli

[attachment deleted by admin]

Title: Roll Call
Post by: Brandon Bartolomucci on April 20, 2012, 06:13:47 AM

Hey! I thought this thread was brown holed for a while.

Nice set up you have there! Thanks for sharing.


Regards,
Brandon Bartolomucci
Sent from my iPhone