Synergy Tech Support
Synergy Nitro Helicopters => Synergy N5 / N5c => Topic started by: Carzan on September 13, 2014, 06:04:44 PM
-
Got 8 flights in on my new N5 today. All I can say is WOW! This is really a solid bird! Great flyer For me! My set up of the CGY750 was spot on and I am really impressed with every aspect of flying this helicopter. Flips and rolls were consistent and even though I haven't flown in so long I still managed some fast forward flight and inverted hovering. I ran a few dry runs for autos but never managed to muster the courage to flip the throttle hold switch.
Anyways, It is a great flying helicopter and I am glad I chose synergy for my re-entry into the hobby! And once again I would like to thank everyone on this board for the help getting this bird built! Special thanks to RodneyK for the GY750 help!
-
Nice! That's so awesome that everything went so well. Great job on the setup. For being your first FBL setup and your first setup, period, in quite a while that's got to be a sweet feeling to get in that many flights on the day of the maiden. :D
-
Nice to hear! Congrats on the flights. I can say my N5c is still my go to bird ,However with the N7 dialed in, I'm just enjoying Nitro ..
K
-
Here are a couple of pics. I am adding them because I operate by the "if there are no pics it didn't happen" mantra. ;D
(http://i736.photobucket.com/albums/xx8/Carzan/Mobile%20Uploads/image.jpg)
(http://i736.photobucket.com/albums/xx8/Carzan/Mobile%20Uploads/image-3.jpg)
(http://i736.photobucket.com/albums/xx8/Carzan/Mobile%20Uploads/image-2.jpg)
-
Congrats on the successful maiden and subsequent flights! Always a good day when you fly a heli!
Sent from my SM-N900V using Tapatalk
-
Great to hear and congratulations on the successful maiden, the N5C is a fantastic machine! :)
Cheers,
Ross
-
Lookin good! Hope you have many successful flights with her........
-
Hey congrats and have fun with it! I am finally enjoying my N5 too!
-
Very cool your inspiring me to put this N7 in the box together for my first into experience!
Barry
-
Do it Barry. You will really kick yourself for waiting so long after you fly the N7..
Rick
-
Get it together Barry! I really want to hear about it once you get it flying! I've owned a couple of 90 size Nitros and will add one to my current fleet once I reach a certain point with my flying. If I was at that point today, I would add the N7. But then again I have always been somewhat of a fan of Synergy even since my days of flying the N9. ;)
-
I love my N5c! I have been buying all the parts to build an N7 (engine FBL servos etc.) I just need to sell my other electric to fund the airframe.
-
Fortunately? I'm to busy with my business to put the N7 together right now. It's like a fine wine sitting there calling my name. LOL I've been switching to Futaba 14sg and tuning the E5 and E7.
I will continue to pick up parts for the N7. Still need a starter, fuel pump, fuel, push glow and some other bits.
Sent from my iPad using Tapatalk
-
Yup, getting all the flight gear together for nitro can definitely be a pain! The good thing is, once you have it you're done. I really do want to hear about the N7 once you get it airborne. I know that I've had several 50's in my day and the N5 is definitely the cat's meow of everything I have flown! So I imagine the N7 will hold the same or similar place among the 90 size birds.
-
Fortunately? I'm to busy with my business to put the N7 together right now. It's like a fine wine sitting there calling my name. LOL I've been switching to Futaba 14sg and tuning the E5 and E7.
I will continue to pick up parts for the N7. Still need a starter, fuel pump, fuel, push glow and some other bits.
Sent from my iPad using Tapatalk
If you get a push glo you have to get the twist lock pigtail and the little tool it is awesome. For a starter I use the torque master 90 and the thunder tiger hex driver with a 3s lipo velcro'd to the starter (just cut the aligator clips off and put your choice of connector on the wires), I use a simple hand crank pump. I think I got all of this and a few other bits from Amain for less than 100$
Orr you could trade your N7 airframe with me for a blade 600x with the bright orange canopy, 4 pulse packs, 2 gens ace packs. H6040 H6080g servos, castle edge 80hv, bec, and a few other parts and you wouldn't have to put it together ;) lol I know you wouldn't be interested. Just throwing it out there.
-
Thanks for all the additional information. I came from blade helicopters and do I like them. I must resist this temptation to go all electric and stick with my adventure to head into the nitro world! I would like to see how a 600 flies one of these days.
Barry