Synergy Tech Support
Synergy Nitro Helicopters => Synergy N5 / N5c => Topic started by: 3Dwanabe on December 21, 2013, 05:12:16 AM
-
Hey guys, just picked up my second Synergy machine, the N5c TT.
What tail blades work well with Rail 606's, are Rail 96's to long for this heli.
-
Hello!
96mm are perfect for the N5c!
sent from my Verizon Samsung Galaxy Note 2
-
Concur with Chris, 96's are perfect.
-
I generally agree, but I'd like to add that, when I moved to Las Vegas this summer, and it was routinely 110+F with 15% humidity and 2,200 feet ASL, I temporarily switched to 106's at the advice of some of the long-time local guys, and it made a noticeable improvement in tail authority. I could have gotten by with 96's, but the 106's felt better in those conditions. Now that the weather has turned, and it's much cooler outside, I'm back to the 96's, and they're working great. So, my advice is, generally go with 96's unless conditions (e.g., high altitude and/or temperatures) warrant a change, and then consider 106's.
-
Thanks for the info guys :)
I'm living in Hobart, Tasmania so it's cool for most of year.
I've ordered a set of the 96's and will be doing the build over my Christmas break.
-
Thanks for the info guys :)
I'm living in Hobart, Tasmania so it's cool for most of year.
I've ordered a set of the 96's and will be doing the build over my Christmas break.
No that is what I would prefer to do over the holidays ;D
Have fun!
cheers
Alan