Synergy Tech Support
Other Manufacturer => General Heli Support => Topic started by: beans07 on July 05, 2012, 12:44:50 AM
-
Hi Matt, if you have any input (or any other sponsored guys here) for suggestions/improvements to Futaba can you please please ask them very nicely to have a proper throttle activated timer on the 8FG radio. One that turns on and off above a certain adjustable throttle %.
I know there is stick position timers and others but none are the output % of throttle type. There are threads in various forums about it and I posted the request on Futaba Facebook and never got a reply from them.
It is one of the only things I miss about my DX8. (telemetry and BNF helis and planks the others).
-
Are you sure that throttle hold won't work for you? I don't use a "normal" on any flight mode meaning that when I switch off out of throttle hold regardless of stick position the motor starts running. So throttle hold switches my timer on and off. Throttle hold off = motor and timer running & throttle hold on = motor and timer off!
Nitro or electric does not matter.
There is a throttle percentage on/off for the timer it just doesn't show a % number but involves stick position. That doesn't work for you?
Tom
-
beans I don't understand what you are asking that is what I'm using on my Futaba 8FG, Timer on throttle stick, just set it on J3.
-
On the 8fg futaba uses stick position over throttle position as you can change the throttle position in the throttle curve.
My 8fg is set up so when I moved throttle above 40% the trimmer starts it stops when throttle hold is on and comes on again when over 40%. And stays on in the idle ups. And set up is easy.
-
I don't want it as a stick position but as a throttle percentage output.
DX8 has this as does x9503.
When the throttle output is above a certain percentage the timer comes on regardless of stick position.
Eg
20% when I spool up in normal mode when the 20% throttle is reached the timer comes on, which would be a stick position when I have a linear 0-50-100 curve and when I lower bellow 20% throttle timer goes off. Hold being bellow 20% is also timer off. When in hold and I flick out of idle up the timer comes on and then off in hold.
I know people use other methods that are alright but IMO this is a better way to do it. There is a few page thread on HF with people wanting the same thing.
I am not certain but I think the 10 channel has this already implemented but was left out of the 8FG.
I see it as a basic firmware update.
I fly more nitro than electric. I always start and spool up in normal before flicking into flight mode.