Synergy Tech Support
Synergy Nitro Helicopters => Synergy N7 => Topic started by: Uwe on July 18, 2016, 10:39:44 AM
-
Hi Guys
About page 3
Helical Pinion Factory Installed
Is it true the Helical Pinion is already connected with loctite with the Clutch Bell .
Excuse my first post , if possible please change to New Topic
-
I pulled mine and locktited it. But the good news is in this case. The torque of the engine is continually tightening the pinion.
Sent from my iPhone using Tapatalk
-
thank you