Synergy Tech Support

Synergy Nitro Helicopters => Synergy N7 => Topic started by: bgymr on July 13, 2017, 11:19:26 AM

Title: Torque tube assembly
Post by: bgymr on July 13, 2017, 11:19:26 AM

Is there an easier way of doing the torque tube than the manual suggests?

Title: Re: Torque tube assembly
Post by: FlamingHomer on July 14, 2017, 06:51:01 AM

What do you mean with easier?

Gesendet von meinem SM-G930F mit Tapatalk

Title: Re: Torque tube assembly
Post by: Kevin Feil on July 14, 2017, 08:33:06 PM

Please elaborate on your struggles, we may be able to give you some pointers no doubt. There are some tips and tricks to this.

K

Title: Re: Torque tube assembly
Post by: bgymr on July 25, 2017, 09:42:44 AM

I didn't trust that the loctite would hold.  Which I was wrong on.  Held no problem.  It's assembled and maidened.  Thanks!

Title: Re: Torque tube assembly
Post by: John Jackson on August 08, 2017, 07:18:00 AM

I know you've flown the heli already, but did you also install the bolts and nuts to hold the TT ends? hopefully there's more than locktite on the assembly