Synergy Tech Support
Synergy Electric Helicopters => Synergy E7SE => Topic started by: Jsoto91283 on October 22, 2017, 09:07:54 PM
-
I'm getting my e7se purchased on Friday and used but I have a few questions I have a pyro 700 52 setting around and would like to no if it's suitable for this heli. My target headspeed are 1800,1850,1900. If the motor is suitable will the stock pinion work or will I have to go down a size. also with those headspeed It's coming with 106 tail blades or should I get 116. Just trying to prepare before I get her thanx
-
Hello!
I know a few guys running Pyro 700 52s its a good fit. Won't be a crack 3D machine but still very capable!
The tail ratio is geared for 1850-2050 on 106s. So you should be fine. If you do decide to try 116, don't go larger than 700 on mains. Can get some interaction on the blades if you don't space the tail box properly.
-
He Chris thanx for the reply I'm actually getting the e7se from a fellow gentleman that you just help to get her back and the air after a crash. Buying it off helifreak. Really looking forward to it. Good to no I could use this motor for my setup. I'm no 3d pilot yet but when I get there then I'll worry about it when the time comes. It's coming with 696 rails. First time running them so ill see what the hype is about
Thanx
-
Welcome to Synergy! The 700-52 should serve your purpose well. Congrats on the heli, hope you love it! Hit us up if you need anything.
-
Is the stock pinion okay for headspeed that I'm looking for?
-
Yeah the 12t should be perfect.