part number needed for main shaft and clutch

[John Jackson]

Hi All,
I need the part number for my n5c main shaft Belt drive version. The store only shows the TT version or is it the same?
I'm also looking for a clutch. The manual lists it as #610-160, but it does not show in the search function.
Thanks Again!

[Ross Lawton]

Hi John,

If you have an original belt driven N5c then you will need the 610-140 mainshaft which has the stepdown for the lower bearing block.

If you have the N5c torque tube version then you will need the 610-410 mainshaft?

The clutch is the same on the original N5 and both the N5C Belt/TT versions, the part number for the clutch is: 200-405.

Hope this helps, if I can be of any further help just give me a shout.
Cheers,
Ross

[John Jackson]

Thanks Ross,
it is the belt driven tail n5c.
There seems to be a discrepancy in the manual versus the actual part number for the clutch,but the part number you provided worked for Matt's store so I'll go with it.
thanks again!

[Ross Lawton]

Hi John,

Your very welcome, glad i could help! 

The original part numer of 610-160 was for the bare clutch without the one-way bearing, this part was discontinued and replaced with the 200-405 clutch as this has the one-way bearing pre-installed.

Cheers,
Ross