November 21, 2024, 11:03:34 PM
« previous next »
Pages: 1 2 [3]

Author Topic: N7 Build  (Read 8705 times)

Offline BIG B

  • Member
  • **
  • Posts: 58
Re: N7 Build
« Reply #30 on: January 09, 2014, 07:12:22 PM »
Help. Is it normal for the swash plate to stop at this point on the main shaft?
Logged
Nitro will never die!

Offline MadBird

  • Member
  • **
  • Posts: 54
Re: N7 Build
« Reply #31 on: January 09, 2014, 07:47:48 PM »
No it's not normal, mine goes all of the way down until it touches the collar (with no linkages connected). Is there a burr/score/deformation of the main shaft at that point?
Logged

Offline BIG B

  • Member
  • **
  • Posts: 58
Re: N7 Build
« Reply #32 on: January 09, 2014, 07:51:22 PM »
Main shaft looks good.
Logged
Nitro will never die!

Offline BIG B

  • Member
  • **
  • Posts: 58
Re: N7 Build
« Reply #33 on: January 09, 2014, 08:06:35 PM »
Just pulled the main shaft. Collar slides easily at both ends, when it gets to the middle it gets super tight. Guess the main shaft isn't correct. :(
Logged
Nitro will never die!

Offline MadBird

  • Member
  • **
  • Posts: 54
Re: N7 Build
« Reply #34 on: January 09, 2014, 08:31:54 PM »
Oh Bugger!! I wonder if it might be worth sending Matt an email to see if he has any spare ones laying around that he can send you to get you in the air asap?
Logged

Offline MadBird

  • Member
  • **
  • Posts: 54
Re: N7 Build
« Reply #35 on: January 09, 2014, 08:41:07 PM »
I looked on mattbotos.com and it appears all of the spares for the N7 are now listed, so hopefully they are in stock and can help you out pretty quickly with a doa claim.
Logged

Offline BIG B

  • Member
  • **
  • Posts: 58
Re: N7 Build
« Reply #36 on: January 09, 2014, 10:14:34 PM »
Tight tolerance on about an inch of the shaft. Got it sorted thanks to Alan (flyalan). He gave me a tip. He told me to take 800 Grit sandpaper and some oil and sand the spot. I ended up chucking the shaft in a drill to speed things up. Used 1500 grit last to polish it up. Took about ten minutes with the drill.

Thanks Alan. My weekend maiden is still on schedule!! 
Logged
Nitro will never die!

Offline Rodney Kirstine

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 2112
Re: N7 Build
« Reply #37 on: January 09, 2014, 10:30:15 PM »
Sweet!

Sent from my MotoX via Tapatalk2

Logged
Rodney

Team Synergy

Offline MadBird

  • Member
  • **
  • Posts: 54
Re: N7 Build
« Reply #38 on: January 10, 2014, 05:19:29 AM »
Good to hear it's all sorted Big B.
Logged

flyalan

  • Guest
Re: N7 Build
« Reply #39 on: January 10, 2014, 05:43:50 AM »
Glad you that all worked out Big B. Good luck on the maiden!

Sent from my SM-N900V using Tapatalk

Logged
Pages: 1 2 [3]
« previous next »