October 31, 2024, 09:32:51 PM

Author Topic: Castle ESC Settings for Scorpion Motors  (Read 2764 times)

Offline Chris Wall

  • Field Representative
  • Full Member
  • ****
  • Posts: 221
    • WallsWorld
Castle ESC Settings for Scorpion Motors
« on: December 02, 2013, 12:15:33 PM »
I just purchased a 4525-520 Ultimate and I am using a CC Edge 160HV - this is the first Scorpion motor (used to KDE motors) and I am finding very little information outside of the 8 PWM setting.  I emailed Castle and they said leave everything at default except the PWM.  I am using the vbar governor and I seem to be getting a little "pulsing" sound (RPM change?) out of the motor.  Any recommendations?
Synergy Field Representative / Team Scorpion / Team FBL Rotors
www.fortbendhelis.com

Offline Chris Sexton

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2729
  • Admiral, There be whales here!
Re: Castle ESC Settings for Scorpion Motors
« Reply #1 on: December 02, 2013, 12:59:57 PM »
I would turn the VBar gov gain down to like 20 or 25 see if that helps. All my scorpions run stock ESC settings minus the PWN and run great.
Chris Sexton
Synergy Factory Specialist / Rail Blades / Team Scorpion

Offline Chris Wall

  • Field Representative
  • Full Member
  • ****
  • Posts: 221
    • WallsWorld
Re: Castle ESC Settings for Scorpion Motors
« Reply #2 on: December 03, 2013, 07:53:53 AM »
Thanks Chris - I'll try that.
Synergy Field Representative / Team Scorpion / Team FBL Rotors
www.fortbendhelis.com