S-Bus/Full size V-Bar Electronics placement

[Rctintin]

Guys, if you are using the above electronics, where are you placing your S-Bus Rx? I was thinking under the carbon tray, directly behind the V-Bar unit.

There are very little in the way of peoples build pictures on here, and there is not N7 picture thread yet on HF.

[bmclaurin]

Here is what I did with mine. I used coffee stirrers from my favorite donut shop and zip ties to hold the antenna wires in place. If you're not using a voltage regulator, it seems you could easily fit it on the electronics tray. Heck, for that matter, you could strap it directly to the top of the vBar control unit.

EDIT:  There is now an electronics placement pic thread that will probably give you some more ideas. Clearly there is a lot more room for stuff if you ditch the regulator and switchglo.

http://synergyrchelicopters.com/forum/index.php?topic=2371.0