November 22, 2024, 08:25:57 PM
« previous next »
Pages: [1]

Author Topic: What size Allen wrench?  (Read 1420 times)

Offline Barry Tilson

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 617
  • Perspective Visuals
What size Allen wrench?
« on: April 18, 2014, 08:45:41 PM »
What size is the little set screw wrench for the head ball link adapter? Page 46 pn 100-272, M2.5x2 set screw. It's smaller the my 1.5mm.
Guessing .5mm?


Barry
Logged
Perspective Visuals

flyalan

  • Guest
Re: What size Allen wrench?
« Reply #1 on: April 18, 2014, 09:18:31 PM »
1.3mm.  I have an align 1.3mm allen that fits.  If you ever bought and align 450 I think it actually comes in the kit.

Cheers

Alan
Logged

Offline Darren Lee

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 620
Re: What size Allen wrench?
« Reply #2 on: April 18, 2014, 09:33:10 PM »
Or more commonly seen labeled as .050 inch.
Logged
Team Synergy / Rail Blades / Morgan Fuel

Offline Barry Tilson

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 617
  • Perspective Visuals
Re: What size Allen wrench?
« Reply #3 on: April 18, 2014, 09:34:25 PM »
This set screw is to small for the metal ball link? I can wiggle it down past the threads. Something is a miss.


Barry
Logged
Perspective Visuals

Offline Barry Tilson

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 617
  • Perspective Visuals
Re: What size Allen wrench?
« Reply #4 on: April 18, 2014, 09:41:36 PM »
Tried a 2.5 servo screw and it seems to be tighter. Is there such a thing as a 2.0 set screw?


Barry
Logged
Perspective Visuals

Offline Barry Tilson

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 617
  • Perspective Visuals
What size Allen wrench?
« Reply #5 on: April 18, 2014, 10:04:42 PM »
Well I compared the threads with the tail servo ball PN 107-104 a 2.0mm and it's not that small.
Looks like the thread class is a bit sloppy on the alum ball and the 2.5 set screw is a bit under spec. I can wiggle the set screw in and it skips pass the treads. A 2.5mm servo mounting screw seems to be tighter. 
Did Matt bring up an issue with these a while back on the forum?

Not sure what to do at this point. Need new set screws.

AOG for parts!

Barry
Logged
Perspective Visuals
Pages: [1]
« previous next »