E7SE tail kick during aileron tic tocs

[flyalan]

Also look at your Gov gain. Try lowering it a bit.

Cheers
Alan

Sent from my SM-N900V using Tapatalk

[Greg Jackson]

Also did you try turning off the gov and see how things handle?

[Dan Minick]

Im running the Kosmik gov. Its set to almost the lowest available. I didn't get a chance to fly the last weekend to try out the gains in the Vbar.  does anyone have a link to help better explain how to use I and P gains?

[luleal26]

yes, Alan is very free and smooth, the size is standard that sends the manual, use Vbar unit, 106mm tail blades, I've tried everything, and I can not fix the problem, is locked, but when mecho syrup and dropped the stick him to varying slightly and this variation whats annoying me, what do I do?

[Matt Botos]

Tail Kick on an electric helicopter is almost always one of the following things in this order.....

1. ESC Governor - this requires some tweaking based on motor/pinion
2. Tail pitch slider is not traveling 100% in both directions
3. FBL Unit is not programmed correctly
4. Tail Servo horn not the correct length
5. Ball links not sized correctly will make the servo "stick" and cause a delay in reaction time.

There are a few more but the above 5 are the usual culprits. As mentioned earlier, turning off the governor is always a good test.

Matt

[Scott Anderson]

Sorry someone already mentioned what I said