November 13, 2024, 12:29:40 AM

Author Topic: Cyclic Digital Servos  (Read 1264 times)

Offline peteowlsmith

  • Member
  • **
  • Posts: 74
Cyclic Digital Servos
« on: May 23, 2015, 04:38:39 PM »
Hi,

I finally decided to go N5c!     My question is servos ---I replaced the ones in my Sceadu EVO over winter with  Futaba S9452 s: 

Volts   Torque   Speed
4.8V   102 oz-in (7.4 kg-cm)   0.13 sec/60°
6.0V   128 oz-in (9.2 kg-cm)   0.11 sec/60°


Are they sufficient for a sports flyer like me?      If so, should I run at 6.0V ?  (getting close to retirement and I hate to blow another wad for brushless)   ::)

  tnx,  Pete



flyalan

  • Guest
Re: Cyclic Digital Servos
« Reply #1 on: May 23, 2015, 04:55:47 PM »
My very first N5 had no BLS JR servos.  Those specs should be fine for sport flying at 6V.  I would not run 4.8.  The use of LiFe batteries for power would be just the ticket.  Just watch your tail servo voltage though.  May need to regulator.  If so PM me. I have some just lying around.

Cheers

Alan

Offline peteowlsmith

  • Member
  • **
  • Posts: 74
Re: Cyclic Digital Servos
« Reply #2 on: May 25, 2015, 03:32:30 PM »
Thanks Alan!    N5c on order ...   As well as LIFE.    I already had a Futaba regulator so all set !      ;D

Offline Rodney Kirstine

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 2112
Re: Cyclic Digital Servos
« Reply #3 on: May 25, 2015, 04:06:26 PM »
Congrats and welcome to the Synergy family!
Rodney

Team Synergy

Offline Richard Rollins

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 553
Re: Cyclic Digital Servos
« Reply #4 on: May 25, 2015, 08:22:51 PM »
Cool , welcome to the family !
Rick
Team Synergy Team Rails, Team Scorpion