November 23, 2024, 03:02:19 PM

Author Topic: RX Lipo  (Read 3185 times)

Offline troasb

  • Full Member
  • ***
  • Posts: 144
Re: RX Lipo
« Reply #15 on: September 17, 2015, 05:05:20 PM »
I use the Align 815/855 brushless servos, but this had nothing to do with the servos I think. I streched it to 8 flights on a 2400mAh 2S LiPo, and I should not have done so, although still reading about 30% capacity.

Offline Rodney Kirstine

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 2112
Re: RX Lipo
« Reply #16 on: September 17, 2015, 05:58:06 PM »
With the BK brushless servos on my N7 I can get 10 flights on a 4000mah receiver pack.  On my N5C I have the BK coreless servos and I get 8 flights out of a 2550mah receiver pack
Rodney

Team Synergy

Offline cml001

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 684
Re: RX Lipo
« Reply #17 on: September 17, 2015, 09:50:37 PM »
What the heck, I get like 4-5 flights out of my 3600s on the N7, and got 4 from 2250s when I used them on my electrics? How low are you guys running your rx packs?
I'm on an HV set up.. MKS 960 cyclic & 990 tail on my Synergy birds... On my Align 550 w stock Align servos I use a regulator as those are not HV... I will double check the # of flights I get Monday.. Shifts start back tomorrow thru Sunday... I'll be fly'n Monday tho & gauge it... I wanna know for sure now myself! Lol.
Clay
I can fly helicopters... Upside down!

Offline Danny Dugger

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 636
Re: RX Lipo
« Reply #18 on: September 17, 2015, 10:15:35 PM »
Huh... I've run various MKS, Torq, and RJX servos on rx packs and always end up around 3.8v/cell after 4-5 flights.

Offline cml001

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 684
Re: RX Lipo
« Reply #19 on: September 17, 2015, 10:42:46 PM »
Keep in mind I'm not 3D Master.. I've been fly'n under 3yrs.. Try'n to progress, but I'm not constantly bang'n them sticks the entire flight.. But I'm not a sport flier either.. So... Hell I don't know, I just fly..  Lol.. But I am curious now & will give u a definite answer on the #s after my next session.
« Last Edit: September 17, 2015, 10:44:20 PM by cml001 »
Clay
I can fly helicopters... Upside down!

Offline troasb

  • Full Member
  • ***
  • Posts: 144
Re: RX Lipo
« Reply #20 on: September 17, 2015, 11:06:14 PM »
Huh... I've run various MKS, Torq, and RJX servos on rx packs and always end up around 3.8v/cell after 4-5 flights.

Yup, that is probably right, do not run the LiPo Rx-packs belove 40%

Offline Mark Dean

  • Field Representative
  • Full Member
  • ****
  • Posts: 221
Re: RX Lipo
« Reply #21 on: September 19, 2015, 08:07:57 PM »
I run a 5000 on my N7 setup. 4 8717 and 1 bls256. I use 450-600mah per flight.

Mark


Sent from my iPhone using Tapatalk
Team Synergy Field Representative, Rail Blades, Scorpion Power Systems